CALCULATION OF THE CYLINDRICAL BENDING FOR THE ANTISYMMETRIC ANGEL-PLY LAMINATE WITH DIFFERENT TENSION AND COMPRESSION MODULI

Zhang Genquan; Wang Tsun-Kuei

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 1992 > 9(1): 93-99

Zhang Genquan, Wang Tsun-Kuei. CALCULATION OF THE CYLINDRICAL BENDING FOR THE ANTISYMMETRIC ANGEL-PLY LAMINATE WITH DIFFERENT TENSION AND COMPRESSION MODULI[J]. Acta Materiae Compositae Sinica, 1992, 9(1): 93-99.

Citation:

Zhang Genquan, Wang Tsun-Kuei. CALCULATION OF THE CYLINDRICAL BENDING FOR THE ANTISYMMETRIC ANGEL-PLY LAMINATE WITH DIFFERENT TENSION AND COMPRESSION MODULI[J]. Acta Materiae Compositae Sinica, 1992, 9(1): 93-99.

Citation:

PDF( 2475 KB)

CALCULATION OF THE CYLINDRICAL BENDING FOR THE ANTISYMMETRIC ANGEL-PLY LAMINATE WITH DIFFERENT TENSION AND COMPRESSION MODULI

Zhang Genquan^1,2,
Wang Tsun-Kuei^1,2

1.
TaiYuan University of Technology

Received Date: 1990-05-01
Publish Date: 1992-03-01

Abstract

Abstract

The Finite-Layer Nlethcd is presented in this paper.By using Jones model of materials and the Finite-Layer Method the maxrnum deflection and coupled effect between bending and extension under cylindrical bending of 2-layer angle ply compression are discussed.The Method mentioned above is applicable to the calculation of symmetric and aniisymmetric angle-ply Laminates with different moduli subjected to the tension or compression loads.
- Finite-Layer Method,
- antisytnmetric ply-laminate
Long Abstrsct
Innovation Points