COATING CARBON FIBER REINFORCED MAGNESIUM COMPOSITES

Wang Haowei; Shang Baolu; Zheng Laisu; Zhou Yaohe

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 1992 > 9(2): 73-76

Wang Haowei, Shang Baolu, Zheng Laisu, et al. COATING CARBON FIBER REINFORCED MAGNESIUM COMPOSITES[J]. Acta Materiae Compositae Sinica, 1992, 9(2): 73-76.

Citation:

Wang Haowei, Shang Baolu, Zheng Laisu, et al. COATING CARBON FIBER REINFORCED MAGNESIUM COMPOSITES[J]. Acta Materiae Compositae Sinica, 1992, 9(2): 73-76.

Wang Haowei, Shang Baolu, Zheng Laisu, et al. COATING CARBON FIBER REINFORCED MAGNESIUM COMPOSITES[J]. Acta Materiae Compositae Sinica, 1992, 9(2): 73-76.

Citation:

Wang Haowei, Shang Baolu, Zheng Laisu, et al. COATING CARBON FIBER REINFORCED MAGNESIUM COMPOSITES[J]. Acta Materiae Compositae Sinica, 1992, 9(2): 73-76.

PDF( 648 KB)

COATING CARBON FIBER REINFORCED MAGNESIUM COMPOSITES

Northwetern Polytechnical University, Xi'an 710072

Received Date: 1990-11-02
Publish Date: 1992-06-01

Abstract

Abstract

This paper focuses on the research of the combination of Mg and carbon fibers coated with Ni,Cu and SiO₂.C/Mg composite is formed by the liquid phase fabrication method.It is found that Ni,Cu and SiO₂ are able to make liquid magnesium welt carbon fiber.Both Cu & Ni coatings disapperar after composite formed Ni shows a bad coexistance with carbon fiber at high temperature.SiO₂ Coating is steady and it has a better protectivity towards carbon fiber.Different coating results in different distribution of fiber in matrix.
- C/Mg composites,
- fiber coating,
- liguid infiltration
Long Abstrsct
Innovation Points