THE INTERFACIAL PROPERTIES IN SiC(Nicalon)/Al COMPOSITES

HuangYudong; Liu Yuyan; Zhang Zhiqian; Wei Yuezhen; Pan Jin; Yang Deming

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 1995 > 12(2): 5-9

HuangYudong, Liu Yuyan, Zhang Zhiqian, et al. THE INTERFACIAL PROPERTIES IN SiC(Nicalon)/Al COMPOSITES[J]. Acta Materiae Compositae Sinica, 1995, 12(2): 5-9.

Citation:

HuangYudong, Liu Yuyan, Zhang Zhiqian, et al. THE INTERFACIAL PROPERTIES IN SiC(Nicalon)/Al COMPOSITES[J]. Acta Materiae Compositae Sinica, 1995, 12(2): 5-9.

HuangYudong, Liu Yuyan, Zhang Zhiqian, et al. THE INTERFACIAL PROPERTIES IN SiC(Nicalon)/Al COMPOSITES[J]. Acta Materiae Compositae Sinica, 1995, 12(2): 5-9.

Citation:

HuangYudong, Liu Yuyan, Zhang Zhiqian, et al. THE INTERFACIAL PROPERTIES IN SiC(Nicalon)/Al COMPOSITES[J]. Acta Materiae Compositae Sinica, 1995, 12(2): 5-9.

PDF( 2442 KB)

THE INTERFACIAL PROPERTIES IN SiC(Nicalon)/Al COMPOSITES

1.
Harbin Institute of Technology, Harbin 150001;
2.
National University of thefence Technology, Changsha 410073

Received Date: 1993-06-15
Rev Recd Date: 1993-12-17
Publish Date: 1995-06-01

Abstract

Abstract

The processing parameter of SiC(Nicalon)/Al composites can influence interfacial bonding status between fiber and matrix.This paper established an in situ interfacial strength testing instrument (ISISTI).Based on this ISISTI,the single-fiber push-out test and the analysis of the interfacial bonding strength for Nicalon/Al composites have been carried out.The results indicate that the data of interfacial bonding strength in Nicalon/Al composites evidently correspond to the processing condition.Therefore,this paper offers a method available for evaluating the interfacial chemical reaction and directing composites processing.
- words SiC (Nicalon)/Al composites,
- fiber/matrix interface,
- interfacial strength,
- pushout test
Long Abstrsct
Innovation Points