Citation: | Luo Xuetao, Zhang Litong. TECHNOLOGICAL DEVELOPMENT OF IN SITU TOUGHENED SILICON NITRIDE CERAMICS[J]. Acta Materiae Compositae Sinica, 1997, 14(3): 1-8. |
1 Pyzik A J,Carroll D F.Technology of self-reinforced siliconnitride.Annu Rev Mater Sci,1994,24:189~214
2 Lange F F.Fracture toughness of Si3N4 as a function of the initial-phase Content.J Am Ceram Soc,1979,62:428~430 3 Tani E,Umebayashi S,Kishi K,et al.Gas-pressure sintering of Si3N4 with concurrent addition of Al2O3 and 5wt% rare-earth oxide:High fracture toughness Si3N4 with fiberlike structure.Am Ceram Soc Bull,1986,65(9):1311~1315 4 Matsuhiro K,Takahashi T.The effect of grainsize on the toughness of sintered Si3N4.Ceram Eng Sci Proc,1989,10(7~8):807 5 Li C W,Yamanis J.Super-tough silicon nit ride with Rcurve behavior.Ceram Eng Sci Proc,1989,10(7~8):632~625 6 Pyzik A J,Schware D B,Dwbensky W J,et al.Self-reinforced Si3N4 ceramic of high fracture toughness and a method of preparing the same.US Pat,No.4883776.Nov.28,1989 7 Luo X T,Zhang L T,Xu Y D,et al.Microst ructure,properties and tough ening mechanisms of in-situ toughened Si3N4.In:Yan D S,Fu X R,Shi S X,eds.Proceedings of the 5th Inter national Symposiumon Ceramic Materials and Components for Engnes,Singapore:World Scientific Publishing Co Pte Ltd,1995.227~230 8 Wu F,Zhuang H,Ma L,et al.Self-rein forcedsili connitride by gas pressure sintering.Ceram Eng Sci Proc,1993,14(2):321~332 9 Becher P F,Lin H T,Hwang S I,et al.In:Chen I W,Becher P F,Mitomo M,et al,eds.Silicon Nitride Ceramics Scientific and T echnological Advances,Pittsburgh:Mater Res Soc,1993.147~58 10 Whalen P J,Gadsaska C J,Silvers R D.Ceram Eng Sci Proc,1990,11:633~649 11 Mitomo M,Tsutsumi H,Tanaka S,et al.J Am Ceram Soc,1990,73:241~245 12 Hwang C J.[PhD Thesis].The University of Michigan,Ann Arbor MI,1988 13 Luo X T.[PhD Thesis].Xi'an:Northwestern Polytechnical University,1996 14 Pyzik A J,Carroll D F,Hwang C J.Pitts burgh:Mater Res Soc,1993.41~16 15 Hampshire S,Leigh M,Morrissey V J,et al.In:Tennery V,ed.Ceramic Materials and Components for Engines.West erville O H,Am Ceram Soc,1989.432~442 16 Janders W A,Mieskowski D M.Ceram Bull,1985,64:304 17 Pyzik A J,Rossow H E,Schwarz D B,et al.US Patent.No.5160508.1992 18 Pyzik A J,Carroll D F,Hwang C J,et al.In:Carlsson R,Johansson T,Kah hman L,eds.Proc 4th Int Symp Ceram Mat and Comp for Engines.London/New York:Elsevier,1992.584~593 19 Pyzik A J,Beaman D R.J Am Ceram Soc,1990,73:244~245 20 Hirosaki N,Akimune Y,Mitomo M.J Am Ceram Soc,1993,76(7):1892~1894 21 Becher D F.J Am Ceram Soc,1991,74(2):255~269 22 Kwashima K,Okamoto H,Yamamoto H,et al.Nippon Seram Kyokai Gaku Ron,1991,99:320~323 23 Heinrich J,Backer E,Bohmer M.J Am Ceram Soc,1988,71(1):C-23~C-28 24 Urashima K,Tajima Y,Watanabe M.In:Bradt R C,Hasselman D P,Munz D,et al,eds.Fracture Mechanics of Ceramics Composites,R-Curve Behavior and Fatigue.New York:Plenum,1992.235~249 25 Choi S R,Salem J A,Janders W A.J Am Ceram Soc,1992,75:1508~1511 26 Ritter J E,Choi S R,Jakus K,et al.J Mater Soc,1991,26:5543 27 Hoffman H J,Schnieder G A,Petzow G.In:Schnieder G A,Petzow G,eds.Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics,Wetherlands:Kluwer,1993.49~58 28 Whalen P J,Gadsaka C J,Silvers R D.Ceram Eng Sci Proc,1990,11:633~649 29 Thouless M D.Res Mech,1987,22:213~242 |