TECHNOLOGY OF PREPARING ISOTROPICAL POLYMER-NdFeB MAGNETIC COMPOSITE

Wen Dijiang; Wan Ying; Lu Xiaobo

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 1997 > 14(4): 6-9

Wen Dijiang, Wan Ying, Lu Xiaobo. TECHNOLOGY OF PREPARING ISOTROPICAL POLYMER-NdFeB MAGNETIC COMPOSITE[J]. Acta Materiae Compositae Sinica, 1997, 14(4): 6-9.

Citation:

Wen Dijiang, Wan Ying, Lu Xiaobo. TECHNOLOGY OF PREPARING ISOTROPICAL POLYMER-NdFeB MAGNETIC COMPOSITE[J]. Acta Materiae Compositae Sinica, 1997, 14(4): 6-9.

Wen Dijiang, Wan Ying, Lu Xiaobo. TECHNOLOGY OF PREPARING ISOTROPICAL POLYMER-NdFeB MAGNETIC COMPOSITE[J]. Acta Materiae Compositae Sinica, 1997, 14(4): 6-9.

Citation:

Wen Dijiang, Wan Ying, Lu Xiaobo. TECHNOLOGY OF PREPARING ISOTROPICAL POLYMER-NdFeB MAGNETIC COMPOSITE[J]. Acta Materiae Compositae Sinica, 1997, 14(4): 6-9.

PDF( 169 KB)

TECHNOLOGY OF PREPARING ISOTROPICAL POLYMER-NdFeB MAGNETIC COMPOSITE

1.
School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 215006;
2.
Wuhan Shenlong Automobile Company Ltd, Wuhan 430000

Received Date: 1996-07-07
Rev Recd Date: 1996-10-10
Publish Date: 1997-12-01

Abstract

Abstract

This paper studies the technology of preparing isotropical NdFeB magnetic composites through compression molding process.The result shows that the characteristics of the NdFeB magnetic composites are remarkably affected by different kinds of magnetic powders and adhesives.Increasing the filler level of magnetic composites will dogood to improve the magnetic characteristics of the magnetic within a certain limit.
- NdFeB,
- polymer,
- magnetic composites,
- molding process
Long Abstrsct
Innovation Points