Abstract:
Steel fiber reinforced sea sand geopolymer recycled concrete (SFSGRAC) has the dual advantages of solid waste recycling and marine local materials. Its preparation process can absorb a large amount of waste concrete and undisturbed sea sand. It is a new low-carbon building material for marine engineering. In this paper, the uniaxial compressive stress-strain behavior of steel fiber sea sand geopolymer recycled aggregate concrete was studied. The effects of three steel fiber shapes (wave, hook-end and milling) and four steel fiber contents (0%, 0.5%, 1.0% and 1.5%) on sea sand geopolymer recycled concrete (SGRAC) were considered. The failure mode, stress-strain curve and corresponding compression characteristics of the specimens were analyzed, including peak stress/strain, deformation modulus and toughness index. The results show that the failure mode of the specimen with steel fiber is transformed into shear type, and the fiber bridging effect increases the peak stress and corresponding strain of the test block. Under the same fiber content, the reinforcement effect of steel fiber shows different shape dependence in the two dimensions of peak stress and post-peak ductility. Within the scope of the test parameters, the fiber factor
F is introduced, and the segmented compression constitutive model is established. The prediction accuracy of the uniaxial compression stress-strain response of SFSGRAC is high, and the calculation results are in good agreement with the corresponding test results.