COMPARISON BETWEEN NUMERICAL SIMULATION AND EXPERIMENTAL RESULT OF RESIN FLOW IN RTM

QIN Wei; LI Haichen; ZHANG Zhiqian; WU Xiaohong

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2003 > 20(4): 77-80

QIN Wei, LI Haichen, ZHANG Zhiqian, et al. COMPARISON BETWEEN NUMERICAL SIMULATION AND EXPERIMENTAL RESULT OF RESIN FLOW IN RTM[J]. Acta Materiae Compositae Sinica, 2003, 20(4): 77-80.

Citation:

QIN Wei, LI Haichen, ZHANG Zhiqian, et al. COMPARISON BETWEEN NUMERICAL SIMULATION AND EXPERIMENTAL RESULT OF RESIN FLOW IN RTM[J]. Acta Materiae Compositae Sinica, 2003, 20(4): 77-80.

QIN Wei, LI Haichen, ZHANG Zhiqian, et al. COMPARISON BETWEEN NUMERICAL SIMULATION AND EXPERIMENTAL RESULT OF RESIN FLOW IN RTM[J]. Acta Materiae Compositae Sinica, 2003, 20(4): 77-80.

Citation:

QIN Wei, LI Haichen, ZHANG Zhiqian, et al. COMPARISON BETWEEN NUMERICAL SIMULATION AND EXPERIMENTAL RESULT OF RESIN FLOW IN RTM[J]. Acta Materiae Compositae Sinica, 2003, 20(4): 77-80.

PDF( 681 KB)

COMPARISON BETWEEN NUMERICAL SIMULATION AND EXPERIMENTAL RESULT OF RESIN FLOW IN RTM

1.
Space Materials and Environment Engineering Lab., Harbin Institute of Technology, Harbin 150001,China;
2.
Center for Composite Materials, Harbin Institute of Technology, Harbin 150001,China;
3.
Department of Applied Chemistry, Harbin Institute of Technology, Harbin 150001,China

Received Date: 2002-01-14
Rev Recd Date: 2002-03-27
Publish Date: 2003-08-15

Abstract

Abstract

The molding filling process is a very important phase in RTM. This paper studies the RTM process and its resin flow process. The governing equations of resin flow are built up. The boundary-fitted coordinate system and the finite difference method are employed for simulating the resin flow process. The successive resin flow front position and the pressure distribution at the final stage are obtained, and good agreement is found between the numerical simulation and experimental results as well as other investigations.
- RTM,
- resin flow,
- numerical simulation,
- boundary-fitted coordinate system
Long Abstrsct
Innovation Points