RESIN FLOW SIMULATION IN RTM PROCESS FOR THICK SECTION PARTS

DAI Fuhong; ZHANG Boming; DU Shanyi; WU Zhanjun

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2004 > 21(3): 6-10

DAI Fuhong, ZHANG Boming, DU Shanyi, et al. RESIN FLOW SIMULATION IN RTM PROCESS FOR THICK SECTION PARTS[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 6-10.

Citation:

DAI Fuhong, ZHANG Boming, DU Shanyi, et al. RESIN FLOW SIMULATION IN RTM PROCESS FOR THICK SECTION PARTS[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 6-10.

DAI Fuhong, ZHANG Boming, DU Shanyi, et al. RESIN FLOW SIMULATION IN RTM PROCESS FOR THICK SECTION PARTS[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 6-10.

Citation:

DAI Fuhong, ZHANG Boming, DU Shanyi, et al. RESIN FLOW SIMULATION IN RTM PROCESS FOR THICK SECTION PARTS[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 6-10.

PDF( 1412 KB)

RESIN FLOW SIMULATION IN RTM PROCESS FOR THICK SECTION PARTS

Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, China

Received Date: 2003-03-10
Rev Recd Date: 2003-06-23
Publish Date: 2004-06-15

Abstract

Abstract

The resin flow in RTM process for thick section parts was investigated. A program HEXCV for three dimensional resin flow process was developed based on the hexahedral element with the finite element/control volume method (FE/CVM). The accuracy and the reliability of the HEXCV program were confirmed, compared with the analytical solutions. Numerical examples show that the HEXCV program can provide an effective reference for the process design.
- resin transfer molding (RTM),
- simulation,
- finite element /control volume method (FE/CVM),
- resin
Long Abstrsct
Innovation Points