Effect of adhesive thickness on mechanical properties of carbon fiber/bismaleimide resin composite flat-joggle-flat hybrid (bonded-bolted) joint

LIU Zhiming; XU Chang

doi:10.13801/j.cnki.fhclxb.20200121.003

Volume 37 Issue 11

Nov. 2020

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2020 > 37(11): 2825-2832

LIU Zhiming, XU Chang. Effect of adhesive thickness on mechanical properties of carbon fiber/bismaleimide resin composite flat-joggle-flat hybrid (bonded-bolted) joint[J]. Acta Materiae Compositae Sinica, 2020, 37(11): 2825-2832. doi: 10.13801/j.cnki.fhclxb.20200121.003

Citation:

LIU Zhiming, XU Chang. Effect of adhesive thickness on mechanical properties of carbon fiber/bismaleimide resin composite flat-joggle-flat hybrid (bonded-bolted) joint[J]. Acta Materiae Compositae Sinica, 2020, 37(11): 2825-2832. doi: 10.13801/j.cnki.fhclxb.20200121.003

Citation:

LIU Zhiming, XU Chang. Effect of adhesive thickness on mechanical properties of carbon fiber/bismaleimide resin composite flat-joggle-flat hybrid (bonded-bolted) joint[J]. Acta Materiae Compositae Sinica, 2020, 37(11): 2825-2832. doi: 10.13801/j.cnki.fhclxb.20200121.003

PDF( 1349 KB)

Effect of adhesive thickness on mechanical properties of carbon fiber/bismaleimide resin composite flat-joggle-flat hybrid (bonded-bolted) joint

doi: 10.13801/j.cnki.fhclxb.20200121.003

LIU Zhiming^,,
XU Chang

School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China

Received Date: 2019-11-27
Accepted Date: 2020-01-12

Available Online: 2020-01-21

Publish Date: 2020-11-15

Abstract

Abstract

Experiments were carried out to compare the static strengths and fatigue behaviors of the carbon fiber/bismaleimide (BMI) resin composite flat-joggle-flat (FJF) joints under a certain adhesive thickness. Meanwhile, effects of the adhesive thickness on the mechanical properties of the carbon fiber/BMI resin composite FJF hybrid joints were explored. Backface strain technology was used to detect the adhesive cracking at the end of the overlap zone. Adhesive stress distributions in the overlap zone of the carbon fiber/BMI resin composite FJF hybrid joints were analyzed based on the ABAQUS software. The results show that the average tensile ultimate load, the average adhesive cracking cycles at the end of the overlap zone and the average fatigue life of the carbon fiber/BMI resin composite FJF hybrid joints all rise with the increasing adhesive thickness in a certain range of 0.1 mm to 0.3 mm. The carbon fiber/BMI resin composite FJF hybrid joints with different adhesive thicknesses all go through the same failure stages: Firstly the adhesive cracking happens at the end of the overlap zone, then the adhesive crack extends along the overlap zone, finally a net-tension failure occurs at the hole near the loading end, presenting the fracture appearance of ±45°. As the adhesive thickness increases within the range of 0.1 mm to 0.3 mm, adhesive peel and shear stress at the end of the overlap zone and the compressive stresses around the bolt hole all decrease. Shear stress is the main factor that accounts for the adhesive failure.
- carbon fiber,
- bismaleimide(BMI) resin,
- composite,
- flat-joggle-flat (FJF) hybrid joint,
- adhesive thickness,
- static strength,
- fatigue life,
- adhesive stress
Long Abstrsct
Innovation Points

FullText(HTML)

References(19)

References

[1]	ARENAS J M, NARBÓN J J, ALĺA C. Optimum adhesive thickness in structural adhesives joints using statistical techniques based on Weibull distribution[J]. International Journal of Adhesion and Adhesives,2010,30(3):160-165. doi: 10.1016/j.ijadhadh.2009.12.003
[2]	XU W, WEI Y G. Strength and interface failure mechanism of adhesive joints[J]. International Journal of Adhesion and Adhesives,2012,34:80-92. doi: 10.1016/j.ijadhadh.2011.12.004
[3]	NAITO K, ONTA M, KOGO Y. The effect of adhesive thickness on tensile and shear strength of polyimide adhesive[J]. International Journal of Adhesion and Adhesives,2012,36:77-85. doi: 10.1016/j.ijadhadh.2012.03.007
[4]	XU W, WEI Y G. Influence of adhesive thickness on local interface fracture and overall strength of metallic adhesive bonding structures[J]. International Journal of Adhesion and Adhesives,2013,40:158-167. doi: 10.1016/j.ijadhadh.2012.07.012
[5]	王玉奇, 何晓聪, 邢保英, 等. 胶厚对单搭粘接接头强度影响的试验与仿真研究[J]. 机械强度, 2014, 36(6):873-877. WANG Yuqi, HE Xiaocong, XING Baoying, et al. Research on the influence of bondline thickness on strength of adhesive bonding of single lap joints based on experiment and simulation[J]. Journal of Mechanical Strength,2014,36(6):873-877(in Chinese).
[6]	BOUTAR Y, NAÏMI S, MEZLINI S, et al. Effect of adhesive thickness and surface roughness on the shear strength of aluminium one component polyurethane adhesive single-lap joints for automotive applications[J]. Journal of Adhesion Science and Technology,2016,30(17):1913-1929. doi: 10.1080/01694243.2016.1170588
[7]	AKHAVAN-SAFAR A, AYATOLLAHI M R, DA SILVA L F M. Strength prediction of adhesively bonded single lap joints with different bondline thicknesses: A critical longitudinal strain approach[J]. International Journal of Solids and Structures,2017,109:189-198. doi: 10.1016/j.ijsolstr.2017.01.022
[8]	BOUTAR Y, NAIMI S, MEZLINI S, et al. Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness[J]. International Journal of Adhesion and Adhesives,2018,83:143-152. doi: 10.1016/j.ijadhadh.2018.02.012
[9]	TAIB A A, BOUKHILI R, ACHIOU S, et al. Bonded joints with composite adherends Part Ⅰ: Effect of specimen configuration, adhesive thickness, spew fillet and adherend stiffness on fracture[J]. International Journal of Adhesion and Adhesives,2006,26(4):226-236. doi: 10.1016/j.ijadhadh.2005.03.015
[10]	ANYFANTIS K N, TSOUVALIS N G. Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents Part Ⅰ: Experiments[J]. Composite Structures,2013,96:850-857. doi: 10.1016/j.compstruct.2012.08.060
[11]	TANG J H, SRIDHAR I, SRIKANTH N. Static and fatigue failure analysis of adhesively bonded thick composite single lap joints[J]. Composites Science and Technology,2013,86:18-25. doi: 10.1016/j.compscitech.2013.06.018
[12]	刘亚文, 宋建国, 马毓, 等. 胶层厚度对双搭接胶连接接头承载力的影响分析[J]. 玻璃钢/复合材料, 2012(2):20-24. doi: 10.3969/j.issn.1003-0999.2012.02.005 LIU Yawen, SONG Jianguo, MA Yu, et al. Impact analysis of load capability of double lap adhesive joint by adhesive thickness[J]. Fiber Reinforced Plastics/Composites,2012(2):20-24(in Chinese). doi: 10.3969/j.issn.1003-0999.2012.02.005
[13]	熊东箭. 玻纤增强复合材料单搭接胶接接头强度研究[D]. 长沙: 湖南大学, 2018. XIONG Dongjian. A study on adhesive strength of single lap structural adhesive join of glass fiber reinforced composites[D]. Changsha: Hunan University, 2018(in Chinese).
[14]	袁辉, 刘鹏飞, 王景全, 等. 胶层厚度对胶连接接头承载力的影响机理与控制[J]. 解放军理工大学学报(自然科学版), 2013, 14(1):53-57. YUAN Hui, LIU Pengfei, WANG Jingquan, et al. Mechanism of layer thickness on bearing capacity of adhesive bonding joints and control[J]. Journal of PLA University of Science and Technology (Natural Science Edition),2013,14(1):53-57(in Chinese).
[15]	KISHORE A N, PRASAD N S. An experimental study of flat-joggle-flat bonded joints in composite laminates[J]. International Journal of Adhesion & Adhesives,2012,35:55-58.
[16]	王毅, 冯宪章, 李磊, 等. 复合材料层合板二次共固化补强胶层失效分析研究[J]. 机械强度, 2012, 34(6):862-867. WANG Yi, FENG Xianzhang, LI Lei, et al. Bonding adhesive damage study of the secondary co-cure reinforcement tensile experiment[J]. Journal of Mechanical Strength,2012,34(6):862-867(in Chinese).
[17]	MCCARTHY M A, MCCARTHY C T, LAWLOR V P, et al. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints Part Ⅰ: Model development and validation[J]. Composite Structures,2005,71(2):140-158. doi: 10.1016/j.compstruct.2004.09.024
[18]	SHENOY V, ASHCROFT I A, CRITCHLOW G W, et al. An investigation into the crack initiation and propagation behaviour of bonded single-lap joints using backface strain[J]. International Journal of Adhesion and Adhesives,2009,29(4):361-371. doi: 10.1016/j.ijadhadh.2008.07.008
[19]	许昶, 刘志明. CFRP平-折-平连接接头试验研究与数值模拟[J]. 北京航空航天大学学报, 2019, 45(11):2207-2216. XU Chang, LIU Zhiming. Experimental study and numerical simulation on CFRP flat-joggle-flat joints[J]. Journal of Beijing University of Aeronautics and Astronautics,2019,45(11):2207-2216(in Chinese).