Citation: | SU Yi, LI Ting, LI Aiqun. Robustness analysis of dynamic properties of polyurethane damping materials based on multi-index control[J]. Acta Materiae Compositae Sinica, 2021, 38(6): 1859-1869. doi: 10.13801/j.cnki.fhclxb.20200825.001 |
[1] |
张志, 许勇. 岳耀, 等. AO-60/丁腈橡胶-环氧化天然橡胶-天然橡胶复合材料的制备及其阻尼性能[J]. 复合材料学报, 2019, 36(8):1796-1803.
ZHANG Zhi, XU Yong, YUE Yao, et al. Preparation and damping properties of hindered phenol AO-80/nitrile butadiene rubber-epoxidized natural rubber-natural rubber composites[J]. Acta Materiae Compositae Sinica,2019,36(8):1796-1803(in Chinese).
|
[2] |
许俊红, 李爱群, 苏毅, 等. 开环式聚降冰片烯共混黏弹性阻尼材料的动态阻尼力学热分析[J]. 高分子材料科学与工程, 2015, 31(7):51-56.
XU Junhong, LI Aiqun, SU Yi, et al. Dynamic damping mechanical analysis of viscolastic damping material mixed norsorex by ring-opening metathesis polymerization[J]. Polymer Materials Science Engineering,2015,31(7):51-56(in Chinese).
|
[3] |
WANG Yueqiong, LIAO Lusheng, LIN Hongtu, et al. Damping properties of natural rubber/epoxidized natural rubber composites with different fillers[J]. Advances in Engineering Research,2018,120:772-775.
|
[4] |
SHI X, LI Q, FU G, et al. The effects of a polyol on the damping properties of EVM/PLA blends[J]. Polymer Testing,2015,33:1-6.
|
[5] |
李翰模, 杨一林, 李志鹏, 等. 基于网络结构设计制备宽温域高阻尼聚氨酯弹性体[J]. 高分子材料科学与工程, 2017, 33(6):146-151.
LI Hanmo, YANG Yilin, LI Zhipeng, et al. Preparation of high damping polyurethane with wide temperature range based on network structure designing[J]. Polymer Materials Science & Engineering,2017,33(6):146-151(in Chinese).
|
[6] |
MOUSA A. Thermal properties of carboxylated nitrile rubber/nylon-12 composites-filled lignocellulose[J]. Journal of Thermoplastic Composite Materials,2014,27(2):167-179. doi: 10.1177/0892705712475017
|
[7] |
LEE K S, CHOI J I, KIM S K, et al. Damping and mechanical properties of composite composed of polyurethane matrix and preplaced aggregates[J]. Construction and Building Materials,2017,3(233):68-75.
|
[8] |
KHIMI S R, PICKRING K L. The effect of silane coupling agent on the dynamic mechanical properties of iron sand/natural rubber magnetorheological elastomers[J]. Composites Part B: Engineering,2016,90:115-125. doi: 10.1016/j.compositesb.2015.11.042
|
[9] |
LEE D J, KIM M K, WALSH J, et al. Experimental characterization of temperature dependent dynamic properties of glass fiber reinforced polyurethane foams[J]. Polymer Texting,2019,74:30-38. doi: 10.1016/j.polymertesting.2018.12.013
|
[10] |
ATIQAH A, JAWAID M, SAPUAN S M, et al. Thermal properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites[J]. Composite Structures,2018,202:954-958. doi: 10.1016/j.compstruct.2018.05.009
|
[11] |
LIU Gang, TANG Shawei, REN Wenchao, et al. Effect of thermal cycling on the damping behavior in alumina borate whisker with and without Bi2O3 coating reinforced pure aluminum composites[J]. Materials and Design,2014,3(34):244-249.
|
[12] |
ADEYINKA Idowu, PRANJAL Nautiyal, LUIZA Fontoura, et al. Multi-scale damping of graphene foam-based polyurethane composites synthesized by electrostatic spraying[J]. Polymer Composites,2019,40:1862-1870. doi: 10.1002/pc.24948
|
[13] |
HUNG Puiyan, KINTAK Lau, KUN Qiao, et al. Property enhancement of CFRP composites with different graphene oxide employment methods at a cryogenic temperature[J]. Composites Part A: Applied Science & Manufacturing,2019,120:56-63. doi: 10.1016/j.compositesa.2019.02.012
|
[14] |
YANG Dawei, ZHAO Xiuying, CHAN Tung, et al. Investigation of the damping properties of hindered phenol AO-80/polyacrylate hybrids using molecular dynamics simulations in combination with experimental methods[J]. Journal of Materials Science,2016,51(12):5760-5774. doi: 10.1007/s10853-016-9878-7
|
[15] |
ZHU H, HU Y M, ZHU W D, et al. Multi-objective design optimization of an engine accessory drive system with a robustness analysis[J]. Applied Mathematical Modelling,2020,77:1564-1581. doi: 10.1016/j.apm.2019.09.016
|
[16] |
CHAN KY, YIU C K F, NORDHOLM S. Microphone configuration for beamformer design using the Taguchi method[J]. Measurement,2017,10(25):58-66.
|
[17] |
王卫红, 王园. 基于PCA-AHP-IE的多指标评价模型研究与应用[J]. 浙江工业大学学报, 2019, 47(6):591-596.
WANG Weihong, WANG Yuan. Research and application of multi-criteria evaluation model based on PCA-AHP-IE[J]. Journal of Zhejiang University of Technology,2019,47(6):591-596(in Chinese).
|
[18] |
中华人民共和国国家质量监督检验检疫总局. 硫化橡胶或热塑性橡胶压入硬度试验方法第1部分: 邵氏硬度计法: GB/T 531.1—2008[S]. 北京: 中国标准出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 1: Duromerer method (Shore hardness): GB/T 531.1—2008[S]. Beijing: Standards Press of China, 2008(in Chinese).
|
[19] |
中华人民共和国国家质量监督检验检疫总局. 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定: GB/T 528—2009[S]. 北京: 中国标准出版社, 2009.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties: GB/T 528—2009[S]. Beijing: Standards Press of China, 2009(in Chinese).
|
[20] |
中华人民共和国国家质量监督检验检疫总局. 硫化橡胶或热塑性橡胶撕裂强度的测定: 裤形、直角形和新月形试样: GB/T 529.1—2008[S]. 北京: 中国标准出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. Rubber, vulcanized or thermoplastic-Determination of tear strength (Trouser, angle and crescent test pieces): GB/T 529.1—2008[S]. Beijing: Standards Press of China, 2008(in Chinese).
|
[21] |
中华人民共和国国家质量监督检验检疫总局. 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第1部分: 在常温及高温条件下: GB/T 7759.1—2015[S]. 北京: 中国标准出版社, 2015.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. Rubber, vulcanized or thermoplastic-Determination of compression set-Part 1: At ambient or elevated temperatures: GB/T 7759.1—2015[S]. Beijing: Standards Press of China, 2015(in Chinese).
|
[22] |
中华人民共和国国家质量监督检验检疫总局. 《硫化橡胶或热塑性橡胶动态性能的测定 第1部分: 通则》: GB/T 9870.1—2006[S]. 北京: 中国标准出版社, 2006.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. Rubber, vulcanized or thermoplastic-Determination of dynamic properties-Part 1: General guidance: GB/T 9870.1—2006[S]. Beijing: Standards Press of China, 2006(in Chinese).
|
[23] |
中华人民共和国国家质量监督检验检疫总局. 《橡胶支座第3部分: 建筑隔震橡胶支座》: GB 20688.3—2006[S]. 北京: 中国标准出版社, 2006.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. Rubber bearing-Part 3: Elastomeric seismic-Protection isolators for buildings: GB 20688.3—2006[S]. Beijing: Standards Press of China, 2006(in Chinese).
|