Volume 37 Issue 9
Sep.  2020
Turn off MathJax
Article Contents
WANG Tengjiao, XU Jinyu, ZHU Congjin, et al. Effects of cement-powder ratio on static mechanical properties and failure forms of styrene-acrylic emulsion-based cement composites[J]. Acta Materiae Compositae Sinica, 2020, 37(9): 2324-2335. doi: 10.13801/j.cnki.fhclxb.20200212.002
Citation: WANG Tengjiao, XU Jinyu, ZHU Congjin, et al. Effects of cement-powder ratio on static mechanical properties and failure forms of styrene-acrylic emulsion-based cement composites[J]. Acta Materiae Compositae Sinica, 2020, 37(9): 2324-2335. doi: 10.13801/j.cnki.fhclxb.20200212.002

Effects of cement-powder ratio on static mechanical properties and failure forms of styrene-acrylic emulsion-based cement composites

doi: 10.13801/j.cnki.fhclxb.20200212.002
  • Received Date: 2019-10-23
  • Accepted Date: 2020-01-03
  • Available Online: 2020-02-13
  • Publish Date: 2020-09-15
  • Fixed tensile, tensile and shear tests were carried out on styrene-acrylic emulsion-based cement composite specimens with six different cement-powder ratios to measure the elastic recovery rate, tensile and shear mechanical performance indicators, deformation performance indicators, energy consumption performance indicators and load displacement of the specimens, thereby the effects of cement-powder ratio on the fixed tensile bonding performance, tensile mechanical properties, shear mechanical properties and failure forms of the specimens were studied. And the microscopic mechanism of cement-powder ratio influencing on the mechanical properties and failure forms of the composite was analyzed based on the results of FE-SEM test and Mercury Intrusion Porosimeter(MIP) test. The results show that increasing the cement-powder ratio appropriately can improve the microstructure and optimize the pore structure of the composite. In addition, it can also improve the compactness and significantly enhance the mechanical properties of the composite. With the increase of the cement-powder ratio, the fixed tensile and bonding performance of the specimens gradually decreases, the tensile and shear mechanical performance are continuously improved, and the tensile and shear deformation performance and energy consumption performance of the specimens firstly increase and then decrease. When the cement-powder ratio is between 30% and 35%, the tensile and shear mechanical properties of the specimens are the best. When the cement-powder ratio is 45%, the tensile and shear deformation performance and energy consumption performance of the specimens are worse than the specimens with the cement-powder ratio of 20%. As the cement-powder ratio increases, the load displacement that the specimens can withstand gradually increases firstly and decreases, and the failure form of the specimens gradually changes from “cohesive failure” to “bond failure”.

     

  • loading
  • [1]
    王洁宁, 赵晓鹏. 机场安全热点本体建模及智能划分研究[J]. 中国安全科学学报, 2016, 26(5):47-52.

    WANG Jiening, ZHAO Xiaopeng. Ontology modeling and intelligent division of airport security hotspots[J]. China Safety Science Journal,2016,26(5):47-52(in Chinese).
    [2]
    张献民, 刘小兰, 张子文. 基于振动特性的机场刚性道面传荷性能[J]. 北京航空航天大学学报, 2018, 44(9):1787-1796.

    ZHANG Xianmin, LIU Xiaolan, ZHANG Ziwen. Transshipment performance of airport rigid pavement based on vibration characteristics[J]. Journal of Beijing University of Aeronautics and Astronautics,2018,44(9):1787-1796(in Chinese).
    [3]
    WANG D Y, FEI W S. Joint issue discussion on cement concrete pavement[J]. Advanced Materials Research,2013,671-674(2):1179-1182.
    [4]
    LIU Z G, LI J N, CAO G B. The treatment technology of void beneath cement concrete pavement bottom in cold area[J]. Advanced Materials Research,2014,1049-1050:339-341. doi: 10.4028/www.scientific.net/AMR.1049-1050.339
    [5]
    LIU Z G, XU F M, CAO G B. Study on cement concrete pavement treatment methods of common damage diseases[J]. Applied Mechanics and Materials,2014,716-717:307-309. doi: 10.4028/www.scientific.net/AMM.716-717.307
    [6]
    马正军, 英红, 付琴, 等. 基于数字图像的水泥混凝土路面嵌缝料损坏识别[J]. 建筑材料学报, 2013, 16(2):349-353, 359.

    MA Zhengjun, YING Hong, FU Qin, et al. Damage identification of cement concrete pavement based on digital image[J]. Journal of Building Materials,2013,16(2):349-353, 359(in Chinese).
    [7]
    王治, 王晋斌. 水泥混凝土路面嵌缝料及灌封工艺的研究[J]. 中国建筑防水, 2013(6):35-41.

    WANG Zhi, WANG Jinbin. Research on caulking material for cement concrete pavement and its construction[J]. China Building Waterproofing,2013(6):35-41(in Chinese).
    [8]
    DONG E, LIU J, WU S. Study in the joint sealants of the concrete pavements[C]//2011 International Conference on Remote Sensing, Environment and Transportation Engineering. Nanjing: IEEE, 2011.
    [9]
    LIU Y, PENG P. A key technique for cement concrete pavement joint filler construction in chilly regions[J]. Applied Mechanics and Materials,2012,170-173:3255-3259. doi: 10.4028/www.scientific.net/AMM.170-173.3255
    [10]
    LAGO B D, BIONDINI F, TONIOLO G, et al. Experimental investigation on the influence of silicone sealant on the seismic behaviour of precast façades[J]. Bulletin of Earthquake Engineering,2017,15(4):1771-1787. doi: 10.1007/s10518-016-0045-y
    [11]
    伍家卫, 吕维华, 王艳, 等. PFS硅酮建筑密封胶的制备与性能研究[J]. 化工新型材料, 2011, 39(4):71-73. doi: 10.3969/j.issn.1006-3536.2011.04.020

    WU Jiawei, LV Weihua, WANG Yan, et al. Preparation and properties of PFS silicone building sealant[J]. New Chemical Materials,2011,39(4):71-73(in Chinese). doi: 10.3969/j.issn.1006-3536.2011.04.020
    [12]
    滕晓波, 吴萍, 孙静, 等. 氧化石墨烯改性聚硫密封胶[J]. 高分子材料科学与工程, 2013, 29(6):54-57.

    TENG Xiaobo, WU Ping, SUN Jing, et al. Graphene oxide modified polysulfide sealant[J]. Polymer Materials Science and Engineering,2013,29(6):54-57(in Chinese).
    [13]
    毛俊轩, 潘林, 熊婷. 硅烷改性聚氨酯密封胶与PC粘接性的研究[J]. 化学研究与应用, 2016, 28(11):1654-1656. doi: 10.3969/j.issn.1004-1656.2016.11.023

    MAO Junxuan, PAN Lin, XIONG Ting. Study of adhesion effect between silylated polyurethane sealant with polycarbonate[J]. Chemical Research and Application,2016,28(11):1654-1656(in Chinese). doi: 10.3969/j.issn.1004-1656.2016.11.023
    [14]
    QUAN Y, HE P, ZHOU B, et al. Modification of polysulfide sealant with polysulfide polythio-urethane-urea[J]. Journal of Applied Polymer Science,2007,106(4):2599-2604. doi: 10.1002/app.26792
    [15]
    袁捷, 刘文博. 民用机场水泥混凝土道面接缝嵌缝材料性能指标分析[J]. 公路交通科技, 2016, 33(9):7-13. doi: 10.3969/j.issn.1002-0268.2016.09.002

    YUAN Jie, LIU Wenbo. Analysis of performance indexes of joints in cement concrete pavement joints for civil airports[J]. Journal of Highway and Transportation Research and Development,2016,33(9):7-13(in Chinese). doi: 10.3969/j.issn.1002-0268.2016.09.002
    [16]
    张元霞, 马建中, 徐群娜. 阳离子聚合物乳液的研究进展[J]. 材料导报, 2017, 31(17):64-70.

    ZHANG Yuanxia, MA Jianzhong, XU Qunna. Research advances in cationic polymer emulsions[J]. Materials Review,2017,31(17):64-70(in Chinese).
    [17]
    蒋凌飞, 卢子臣, 孔祥明, 等. 胶体粒子表面改性及其对水泥水化的影响[J]. 硅酸盐学报, 2017, 45(5):601-607.

    JIANG Lingfei, LU Zichen, KONG Xiangming, et al. Surface modification of colloidal particles and its effect on cement hydration[J]. Journal of the Chinese Ceramic Society,2017,45(5):601-607(in Chinese).
    [18]
    方征平, 许承威. 相分散-交联在聚合物共混中的协同作用[J]. 高分子材料科学与工程, 2016, 15(3):116-118.

    FANG Zhengping, XU Chengwei. Synergistic effect of phase dispersion-crosslinking in polymer blending[J]. Polymer Science and Engineering,2016,15(3):116-118(in Chinese).
    [19]
    XU S, LUO Y, TAN B. Recent development of hypercrosslinked microporous organic polymers[J]. Macromolecular Rapid Communications,2013,34(6):471-484. doi: 10.1002/marc.201200788
    [20]
    刘鸿铭, 费逸伟, 孙世安, 等. 聚合物水泥基复合材料及其防腐性能应用研究[J]. 化工时刊, 2016, 30(12):31-36.

    LIU Hongming, FEI Yiwei, SUN Shian, et al. Application of polymer cement matrix composites and their anticorrosion properties[J]. Chemical Industry Journal,2016,30(12):31-36(in Chinese).
    [21]
    衡艳阳, 赵文杰. 聚合物改性水泥基材料的研究进展[J]. 硅酸盐通报, 2014, 32(2):365-371.

    HENG Yanyang, ZHAO Wenjie. Research development of polymer modified cement based materials[J]. Bulletin of the Chinese Ceramic Society,2014,32(2):365-371(in Chinese).
    [22]
    吴丽丽, 王云飞, 谢灵慧, 等. 玻璃纤维增强聚合物复合材料筋与工程水泥基复合材料黏结性能[J]. 复合材料学报, 2020, 37(3):696-706.

    WU Lili, WANG Yunfei, XIE Linghui, et al. Bonding behavior between glass fiber reinforced polymer composite bars and engineered cementitious composite[J]. Acta Materiae Compositae Sinica,2020,37(3):696-706(in Chinese).
    [23]
    韦选纯, 汤盛文, 何真, 等. 聚乙烯醇纤维增强钢渣粉-水泥复合材料基本力学性能及微观结构[J]. 复合材料学报, 2019, 36(8):1918-1925.

    WEI Xuanchun, TANG Shengwen, HE Zhen, et al. Basic mechanical properties and microstructure of polyvinyl alcohol fiber reinforced steel slag powder-cement composites[J]. Acta Materiae Compositae Sinica,2019,36(8):1918-1925(in Chinese).
    [24]
    郑少鹏, 牛开民, 田波, 等. 聚合物乳液对水泥砂浆流变性能的影响[J]. 建筑材料学报, 2017, 20(6):962-969. doi: 10.3969/j.issn.1007-9629.2017.06.009

    ZHENG Shaopeng, NIU Kaimin, TIAN Bo, et al. Effect of polymer emulsion on rheological properties of cement mortar[J]. Journal of Building Materials,2017,20(6):962-969(in Chinese). doi: 10.3969/j.issn.1007-9629.2017.06.009
    [25]
    樊金杰, 郭锦棠, 胡苗苗, 等. 核壳型丁苯胶乳对水泥基复合材料力学性能的影响及其作用机制[J]. 复合材料学报, 2019, 36(2):506-513.

    FAN Jinjie, GUO Jintang, HU Miaomiao, et al. Effect of styrene-butadiene latex with core-shell structure on the mechanical properties of cement-based composite materials and its mechanism[J]. Acta Materiae Compositae Sinica,2019,36(2):506-513(in Chinese).
    [26]
    潘文杰, 郭锦棠, 樊金杰, 等. 接枝改性聚丁二烯胶乳胶乳的制备及其在水泥基复合材料中的应用[J]. 复合材料学报, 2018, 35(4):973-979.

    PAN Wenjie, GUO Jintang, FAN Jinjie, et al. Preparation of graft modified polybutadiene latex latex and its application in cement matrix composites[J]. Acta Materiae Compositae Sinica,2018,35(4):973-979(in Chinese).
    [27]
    李悦, 朱金才, 吴玉生. 聚合物对超高韧性水泥基复合材料性能的影响[J]. 建筑材料学报, 2018, 21(1):26-32. doi: 10.3969/j.issn.1007-9629.2018.01.019

    LI Yue, ZHU Jincai, WU Yusheng. Effect of polymer on properties of ultra high toughness cementitious composites[J]. Journal of Building Materials,2018,21(1):26-32(in Chinese). doi: 10.3969/j.issn.1007-9629.2018.01.019
    [28]
    韩冬冬, 陈维灯, 钟世云. 乳胶粒径对聚合物改性水泥基材料性能的影响[J]. 建筑材料学报, 2017, 20(6):943-949. doi: 10.3969/j.issn.1007-9629.2017.06.019

    HAN Dongdong, CHEN Weideng, ZHONG Shiyun. Effect of latex particle size on properties of polymer modified cement-based materials[J]. Journal of Building Materials,2017,20(6):943-949(in Chinese). doi: 10.3969/j.issn.1007-9629.2017.06.019
    [29]
    CHOI J Y, JOO M K, LHO B C. Effects of silica fume content and polymer-binder ratio on properties of ultrarapid-hardening polymer-modified mortars[J]. International Journal of Concrete Structures and Materials,2016,10:249-256.
    [30]
    韩思聪, 白二雷, 郭创, 等. 苯丙乳液基水泥复合道面填缝料力学性能研究[J]. 硅酸盐通报, 2018, 37(11):3398-3404, 3409.

    HAN Sicong, BAI Erlei, GUO Chuang, et al. Research on mechanical properties of styrene-acrylic emulsion based cement composite pavement joint sealant[J]. Bulletin of the Chinese Ceramic Society,2018,37(11):3398-3404, 3409(in Chinese).
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(18)  / Tables(7)

    Article Metrics

    Article views (768) PDF downloads(18) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return