Tensile properties of multilayer multiaxial interlock 3D woven composites

GUO Ruiqing; ZHANG Yifan; LV Qingtao; CHEN Li

doi:10.13801/j.cnki.fhclxb.20200110.001

Volume 37 Issue 10

Oct. 2020

Turn off MathJax

Article Contents

Article Navigation > Acta Materiae Compositae Sinica > 2020 > 37(10): 2409-2417

GUO Ruiqing, ZHANG Yifan, LV Qingtao, et al. Tensile properties of multilayer multiaxial interlock 3D woven composites[J]. Acta Materiae Compositae Sinica, 2020, 37(10): 2409-2417. doi: 10.13801/j.cnki.fhclxb.20200110.001

Citation:

GUO Ruiqing, ZHANG Yifan, LV Qingtao, et al. Tensile properties of multilayer multiaxial interlock 3D woven composites[J]. Acta Materiae Compositae Sinica, 2020, 37(10): 2409-2417. doi: 10.13801/j.cnki.fhclxb.20200110.001

Citation:

PDF( 1672 KB)

Tensile properties of multilayer multiaxial interlock 3D woven composites

doi: 10.13801/j.cnki.fhclxb.20200110.001

GUO Ruiqing^{1, 2
,},
ZHANG Yifan^{1, 2, 3
,
,},
LV Qingtao^{1, 2
,},
CHEN Li^{1, 2}

1.
Key Laboratory of Advanced Textile Composite Materials, Ministry of Education, Tiangong University, Tianjin 300387, China
2.
School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China
3.
Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122, China

Received Date: 2019-11-06
Accepted Date: 2020-01-02

Available Online: 2020-01-10

Publish Date: 2020-10-15

Abstract

Abstract

Three kinds of multilayer multiaxial interlock 3D woven composites (M3DAWC) were designed and prepared. Digital image correlation system (DIC) and SEM were employed to study the tensile properties of these composites. The results show that the fabric structure has significant effects on the mechanical behavior of M3DAWC. In 0° loading direction, with the increase of the bias yarn volume fraction, the failure mode changes from the neat damage to bias yarn withdrawal. The failure mode exhibits similar trends with that of 0° when the specimens were stretched along 90°, which are pull-out and slippage of the bias yarns. Meanwhile, the volume fraction of the bias yarn also has a significant influence on the tensile strength and modulus of the M3DAWC. In 0° loading direction, the tensile strength and modulus gradually decrease with the increase of bias yarn volume fraction. However, the tensile strength and modulus show an opposite pattern in 90° loading direction.
- multilayer multiaxial,
- 3D woven composites,
- tensile properties,
- failure mechanism
Long Abstrsct
Innovation Points

FullText(HTML)

References(23)

References

[1]	王雅娜, 曾安民, 陈新文, 等. 2.5D机织石英纤维增强树脂复合材料不同方向力学性能测试与模量预测[J]. 复合材料学报, 2019, 36(6):1364-1373. WANG Ya'na, ZENG Anmin, CHEN Xinwen, et al. Mechanical properties testing for 2.5D quartz fiber reinforced resin composites in different directions and module prediction[J]. Acta Materiae Compositae Sinica,2019,36(6):1364-1373(in Chinese).
[2]	CALLUS P J, MOURITZ A P, BANNISTER M K, et al. Tensile properties and failure mechanisms of 3D woven GRP composites[J]. Composites Part A: Appliedence & Manufacturing,1999,30(11):1277-1287. doi: 10.1016/S1359-835X(99)00033-0
[3]	YAHYA M F, GHANI S A, SALLEH J. Modeling plain woven composite model with isotropic behavior[C]. Proceedings of the International Colloquium in Textile Engineering, Fashion, Apparel and Design, 2014, 2014: 19-24.
[4]	卢子兴, 周原, 冯志海, 等. 2.5D机织复合材料压缩性能实验与数值模拟[J]. 复合材料学报, 2015, 32(1):150-159. LU Zixing, ZHOU Yuan, FENG Zhihai, et al. Experiment and numerical simulation on compressive properties of 2.5D woven fabric composites[J]. Acta Materiae Compo-sitae Sinica,2015,32(1):150-159(in Chinese).
[5]	李典森, 卢子兴, 李嘉禄, 等. 三维编织T300/环氧复合材料的弯曲性能及破坏机理[J]. 航空材料学报, 2009, 29(5):82-87. doi: 10.3969/j.issn.1005-5053.2009.05.016 LI Diansen, LU Zixing, LI Jialu, et al. Bending properties and failure mechanism of three dimensional T300/epoxy braided composites[J]. Journal of Aeronautical Materials,2009,29(5):82-87(in Chinese). doi: 10.3969/j.issn.1005-5053.2009.05.016
[6]	MORSCHER G N. Stress-dependent matrix cracking in 2D woven SiC-fiber reinforced melt-infiltrated SiC matrix composites[J]. Composites Science and Technology,2003,64(9):1311-1319.
[7]	MORSCHER G N, YUN H M, DICALO J A. In-plane cracking behavior and ultimate strength for 2D woven and braided melt-infiltrated SiC/SiC composites tensile loaded in off-axis fiber directions[J]. American Ceramic Society, 2007, 90(10): 3185–3193.
[8]	杨彩云, 李嘉禄. 三维机织复合材料力学性能的各向异性[J]. 复合材料学报, 2006, 23(2):59-64. doi: 10.3321/j.issn:1000-3851.2006.02.011 YANG Caiyun, LI Jialu. Mechanical anisotropy of three dimensional woven composites[J]. Acta Materiae Compositae Sinica,2006,23(2):59-64(in Chinese). doi: 10.3321/j.issn:1000-3851.2006.02.011
[9]	KIMBARA M, FUKUTA K, TSUZUKI M, et al. Three-dimensional multi-axis fabric composite materials and methods and apparatuses for making the same: USA, 5076330[P]. 1991-12-31.
[10]	KIMBARA M, TSUZUKI M. Method and apparatus for weaving rod piercing type three-dimensional multiple-axis fabric: USA, 5228481[P]. 1993-7-20.
[11]	FARLEY G L. Method and apparatus for weaving a woven angle ply fabric: USA, 5224519[P]. 1993-7-6.
[12]	ANAHARA M, YASUI Y, SUGOH M, et al. Three-dimensional fabric with symmetrically arranged warp and bias yarn layers: USA, 5270094[P]. 1993-12-14.
[13]	UCHIDA H, YAMAMOTO T, TAKASHIMA H, et al. Three-dimensional weaving machine: USA, 6003563[P]. 1999-12-21.
[14]	MOHAMED M H, BILISIK A K. Multi-layer three-dimensional fabric and method for producing: US Patent, 5465760[P]. 1995-11-14.
[15]	BILISIK A K. Multiaxial three-dimensional (3-D) circular woven fabric: USA, 6129122[P]. 2000-10-10.
[16]	BILISIK K. Multiaxis three-dimensional circular woven preforms–“radial crossing weaving” and “radial in–out weaving”: Preliminary investigation of feasibility of weaving and methods[J]. The Journal of the Textile Institute,2010,101(11):967-987. doi: 10.1080/00405000903080985
[17]	LABANIEH A R, LEGRAND X, KONCAR V, et al. Evaluation of the elastic behavior of multiaxis 3D woven preforms by numerical approach[J]. Journal of Composite Materials,2014,48(26):3243-3252. doi: 10.1177/0021998313508800
[18]	LABANIEH A R, LEGRAND X, KONCAR V, et al. Novel optimization method to estimate the geometrical properties of a multiaxial 3D woven preform[J]. Reinforced Plastics and Composites,2013,32(10):700-712. doi: 10.1177/0731684412472746
[19]	BILISIK K. Multiaxis 3D woven preform and properties of multiaxis 3D woven and 3D orthogonal woven carbon/epoxy composites[J]. Journal of Reinforced Plastics and Composites,2010,29(8):1173-1186. doi: 10.1177/0731684409103153
[20]	王心淼, 陈利, 张典堂, 等. 多层多向机织复合材料细观结构建模及其性能[J]. 纺织学报, 2019, 40(2):45-52. WANG Xinmiao, CHEN Li, ZHANG Diantang, et al. Micro-structure and properties of multilayer multiaxial woven composites[J]. Journal of Textile Research,2019,40(2):45-52(in Chinese).
[21]	American Society for Testing Materials. Standard test method for tensile properties of polymer matrix composite materials: ASTM D3039/3039M—2007[S]. United States: American Society for Testing Materials International, 2007.
[22]	白晓虹. 数字图像相关(DIC)测量方法在材料变形研究中的应用[D]. 沈阳: 东北大学, 2011. BAI Xiaohong. Application of digital image correlation method in study of material deformation[D]. Shenyang: Northeastern University, 2011(in Chinese).
[23]	张睿诚. 数字图像相关方法在应变测量中的应用研究[D]. 重庆: 重庆大学, 2017. ZHANG Ruicheng. The application of digital image correlation method in strain measurement[D]. Chongqing: Chongqing University, 2017(in Chinese).