Citation: | LU Zixing, CUI Shaokang, YANG Zhenyu. Recent progress on mechanical behaviors of nacre and its bio-inspired composites[J]. Acta Materiae Compositae Sinica, 2021, 38(3): 641-667. doi: 10.13801/j.cnki.fhclxb.20201208.002 |
[1] |
CURREY J D. Mechanical properties of mother of pearl in tension[J]. Proceedings of the Royal society of London Series B: Biological sciences,1977,196(1125):443-463.
|
[2] |
JACKSON A P, VINCENT J F V, TURNER R M. The mechanical design of nacre[J]. Proceedings of the Royal society of London Series B: Biological sciences,1988,234(1277):415-440.
|
[3] |
SARIKAYA M, GUNNISON K E, YASREBI M, et al. Mechanical property-microstructural relationships in abalone shell[J]. MRS Online Proceedings Library Archive,1989,174:109-116. doi: 10.1557/PROC-174-109
|
[4] |
MEYERS M A, LIN A Y M, CHEN P Y, et al. Mechanical strength of abalone nacre: Role of the soft organic layer[J]. Journal of the Mechanical Behavior of Biomedical Materials,2008,1(1):76-85. doi: 10.1016/j.jmbbm.2007.03.001
|
[5] |
MEYERS M A, CHEN P Y, LIN A Y M, et al. Biological materials: Structure and mechanical properties[J]. Progress in Materials Science,2008,53(1):1-206. doi: 10.1016/j.pmatsci.2007.05.002
|
[6] |
LOPEZ M I, MARTINEZ P E M, MEYERS M A. Organic interlamellar layers, mesolayers and mineral nanobridges: Contribution to strength in abalone (Haliotis rufescence) nacre[J]. Acta Biomaterialia,2014,10(5):2056-2064. doi: 10.1016/j.actbio.2013.12.016
|
[7] |
ZAREMBA C M, BELCHER A M, FRITZ M, et al. Critical transitions in the biofabrication of abalone shells and flat pearls[J]. Chemistry of Materials,1996,8(3):679-690. doi: 10.1021/cm9503285
|
[8] |
WANG R Z, SUO Z, EVANS A G, et al. Deformation mechanisms in nacre[J]. Journal of Materials Research,2001,16(9):2485-2493. doi: 10.1557/JMR.2001.0340
|
[9] |
BARTHELAT F. Biomimetics for next generation materials[J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences,2007,365(1861):2907-2919. doi: 10.1098/rsta.2007.0006
|
[10] |
DUBEY D K, TOMAR V. Role of molecular level interfacial forces in hard biomaterial mechanics: A review[J]. Annals of Biomedical Engineering,2010,38(6):2040-2055. doi: 10.1007/s10439-010-9988-3
|
[11] |
YOURDKHANI M, PASINI D, BARTHELAT F. Multiscale mechanics and optimization of gastropod shells[J]. Journal of Bionic Engineering,2011,8(4):357-368. doi: 10.1016/S1672-6529(11)60041-3
|
[12] |
许艺, 周俊兵, 宋凡. 珍珠母的微结构与力学行为研究进展[J]. 力学进展, 2008, 38(3):283-302.
XU Yi, ZHOU Junbing, SONG Fan. Research advances of the microstructure and mechanical behavior of nacre[J]. Advances in Mechanics,2008,38(3):283-302(in Chinese).
|
[13] |
BARTHELAT F, TANG H, ZAVATTIERI P D, et al. On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure[J]. Journal of the Mechanics and Physics of Solids,2007,55(2):306-337. doi: 10.1016/j.jmps.2006.07.007
|
[14] |
SCHÄFFER T E, IONESCU-ZANETTI C, PROKSCH R, et al. Does abalone nacre form by heteroepitaxial nucleation or by growth through mineral bridges?[J]. Chemistry of Materials, 1997, 9(8): 1731–1740.
|
[15] |
BARTHELAT F, LI C M, COMI C, et al. Mechanical properties of nacre constituents and their impact on mechanical performance[J]. Journal of Materials Research,2006,21(8):1977-1986. doi: 10.1557/jmr.2006.0239
|
[16] |
SONG F, ZHANG X H, BAI Y L. Microstructure and characteristics in the organic matrix layers of nacre[J]. Journal of Materials Research,2002,17(7):1567-1570. doi: 10.1557/JMR.2002.0233
|
[17] |
SONG F, SOH A K, BAI Y L. Structural and mechanical properties of the organic matrix layers of nacre[J]. Biomaterials,2003,24(20):3623-3631. doi: 10.1016/S0142-9612(03)00215-1
|
[18] |
CHECA A G, CARTWRIGHT J H E, WILLINGER M G. Mineral bridges in nacre[J]. Journal of Structural Biology,2011,176(3):330-339. doi: 10.1016/j.jsb.2011.09.011
|
[19] |
LIN A Y M, CHEN P Y, MEYERS M A. The growth of nacre in the abalone shell[J]. Acta Biomaterialia,2008,4(1):131-138. doi: 10.1016/j.actbio.2007.05.005
|
[20] |
宋凡, 白以龙. 矿物桥与珍珠母结构力学性能[J]. 力学与实践, 1999, 21(6):18-21. doi: 10.3969/j.issn.1000-0879.1999.06.010
SONG Fan, BAI Yilong. Mineral bridges versus the mechanical properties of nacre[J]. Mechanics in Engineering,1999,21(6):18-21(in Chinese). doi: 10.3969/j.issn.1000-0879.1999.06.010
|
[21] |
宋凡, 白以龙. 一类生物材料界面的强韧化分析[J]. 中国科学(A辑), 2001, 31(11):1302-1037.
SONG Fan, BAI Yilong. Interfacial strengthening and toughening analysis of a class of biological materials[J]. Science in China (Series A),2001,31(11):1302-1037(in Chinese).
|
[22] |
宋凡, 白以龙. 一类生物材料界面的结构及其裂纹阻力[J]. 力学与实践, 2002, 24(6):24-26.
SONG Fan, BAI Yilong. Mineral bridges versus the mechanical properties of nacre[J]. Mechanics in Engineering,2002,24(6):24-26(in Chinese).
|
[23] |
SHAO Y, ZHAO H P, FENG X Q. Optimal characteristic nanosizes of mineral bridges in mollusk nacre[J]. RSC Advances,2014,4(61):32451-32456. doi: 10.1039/C4RA04902K
|
[24] |
ESPINOSA H D, RIM J E, BARTHELAT F, et al. Merger of structure and material in nacre and bone: Perspectives on de novo biomimetic materials[J]. Progress in Materials Science,2009,54(8):1059-1100. doi: 10.1016/j.pmatsci.2009.05.001
|
[25] |
LUZ G M, MANO J F. Biomimetic design of materials and biomaterials inspired by the structure of nacre[J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences,2009,367(1893):1587-1605. doi: 10.1098/rsta.2009.0007
|
[26] |
LUZ G M, MANO J F. Mineralized structures in nature: Examples and inspirations for the design of new composite materials and biomaterials[J]. Composites Science and Technology,2010,70(13):1777-1788. doi: 10.1016/j.compscitech.2010.05.013
|
[27] |
BLANK S, ARNOLDI M, KHOSHNAVAZ S, et al. The nacre protein perlucin nucleates growth of calcium carbonate crystals[J]. Journal of microscopy,2003,212(3):280-291. doi: 10.1111/j.1365-2818.2003.01263.x
|
[28] |
CHECA A G, CARTWRIGHT J H E, WILLINGER M G. The key role of the surface membrane in why gastropod nacre grows in towers[J]. Proceedings of the National Academy of Sciences,2009,106(1):38-43. doi: 10.1073/pnas.0808796106
|
[29] |
FRITZ M, BELCHER A M, RADMACHER M, et al. Flat pearls from biofabrication of organized composites on inorganic substrates[J]. Nature,1994,371(6492):49-51. doi: 10.1038/371049a0
|
[30] |
WEGST U G K, HAO B, EDUARDO S, et al. Bioinspired structural materials[J]. Nature Materials,2015,14(1):23-36. doi: 10.1038/nmat4089
|
[31] |
WANG R Z, WEN H B, CUI F Z, et al. Observations of damage morphologies in nacre during deformation and fracture[J]. Journal of Materials Science,1995,30(9):2299-2304. doi: 10.1007/BF01184577
|
[32] |
MEYERS M A, CHAWLA K K. Mechanical behavior of materials (2nd edition)[M]. New York: Cambridge University Press, 2008.
|
[33] |
KATTI K S, KATTI D R, PRADHAN S M, et al. Platelet interlocks are the key to toughness and strength in nacre[J]. Journal of Materials Research,2005,20(5):1097-1100. doi: 10.1557/JMR.2005.0171
|
[34] |
JACKSON A P, VINCENT J F V, TURNER R M. A physical model of nacre[J]. Composites Science and Technology,1989,36(3):255-266. doi: 10.1016/0266-3538(89)90024-9
|
[35] |
MENIG R, MEYERS M H, MEYERS M A, et al. Quasi-static and dynamic mechanical response of Haliotis rufescens (abalone) shells[J]. Acta Materialia,2000,48(9):2383-2398. doi: 10.1016/S1359-6454(99)00443-7
|
[36] |
BRUET B J F, QI H J, BOYCE M C, et al. Nanoscale morphology and indentation of individual nacre tablets from the gastropod mollusc Trochus niloticus[J]. Journal of Materials Research,2005,20(9):2400-2419. doi: 10.1557/jmr.2005.0273
|
[37] |
KATTI K S, MOHANTY B, KATTI D R. Nanomechanical properties of nacre[J]. Journal of Materials Research,2006,21(5):1237-1242. doi: 10.1557/jmr.2006.0147
|
[38] |
MOHANTY B, KATTI K S, KATTI D R, et al. Dynamic nanomechanical response of nacre[J]. Journal of Materials Research,2006,21(8):2045-2051. doi: 10.1557/jmr.2006.0247
|
[39] |
LI X D, CHANG W C, CHAO Y J, et al. Nanoscale structural and mechanical characterization of a natural nanocomposite material: The shell of red abalone[J]. Nano Letters,2004,4(4):613-617. doi: 10.1021/nl049962k
|
[40] |
XU Z H, LI X D. Deformation strengthening of biopolymer in nacre[J]. Advanced Functional Materials,2011,21(20):3883-3888. doi: 10.1002/adfm.201100167
|
[41] |
SMITH B L, SCHÄFFER T E, VIANI M, et al. Molecular mechanistic origin of the toughness of natural adhesives, fibres and composites[J]. Nature,1999,399(6738):761-763. doi: 10.1038/21607
|
[42] |
JIAO D, LIU Z Q, ZHU Y K, et al. Mechanical behavior of mother-of-pearl and pearl with flat and spherical laminations[J]. Materials Science and Engineering C,2016,68:9-17. doi: 10.1016/j.msec.2016.05.089
|
[43] |
GAO H J, JI B H, JÄGER I L, et al. Materials become insensitive to flaws at nanoscale: Lessons from nature[J]. Proceedings of the National Academy of Sciences,2003,100(10):5597-5600. doi: 10.1073/pnas.0631609100
|
[44] |
KOTHA S P, KOTHA S, GUZELSU N. A shear-lag model to account for interaction effects between inclusions in composites reinforced with rectangular platelets[J]. Composites Science and Technology,2000,60(11):2147-2158. doi: 10.1016/S0266-3538(00)00114-7
|
[45] |
BERTOLDI K, BIGONI D, DRUGAN W J. Nacre: An orthotropic and bimodular elastic material[J]. Composites Science and Technology,2008,68(6):1363-1375. doi: 10.1016/j.compscitech.2007.11.016
|
[46] |
BEGLEY M R, PHILIPS N R, COMPTON B G, et al. Micromechanical models to guide the development of synthetic ‘brick and mortar’ composites[J]. Journal of the Mechanics and Physics of Solids,2012,60(8):1545-1560. doi: 10.1016/j.jmps.2012.03.002
|
[47] |
WILLIAM P J, KWEI R, PETZOLD L R, et al. GPU-based simulations of fracture in idealized brick and mortar composites[J]. Journal of the Mechanics and Physics of Solids,2015,80:68-85. doi: 10.1016/j.jmps.2015.03.011
|
[48] |
ASKARINEJAD S, RAHBAR N. Mechanics of bioinspired lamellar structured ceramic/polymer composites: Experiments and models[J]. International Journal of Plasticity,2018,107:122-149. doi: 10.1016/j.ijplas.2018.04.001
|
[49] |
ZHANG P, TO A C. Highly enhanced damping figure of merit in biomimetic hierarchical staggered composites[J]. Journal of Applied Mechanics,2013,81(5):051015.
|
[50] |
ZHANG P, HEYNE M A, TO A C. Biomimetic staggered composites with highly enhanced energy dissipation: Modeling, 3D printing, and testing[J]. Journal of the Mechanics and Physics of Solids,2015,83:285-300. doi: 10.1016/j.jmps.2015.06.015
|
[51] |
QWAMIZADEH M, LIN M, ZHANG Z Q, et al. Bounds for the dynamic modulus of unidirectional composites with bioinspired staggered distributions of platelets[J]. Composite Structures,2017,167:152-165. doi: 10.1016/j.compstruct.2017.01.077
|
[52] |
BARTHELAT F. Designing nacre-like materials for simultaneous stiffness, strength and toughness: Optimum materials, composition, microstructure and size[J]. Journal of the Mechanics and Physics of Solids,2014,73:22-37. doi: 10.1016/j.jmps.2014.08.008
|
[53] |
ZHANG Z Q, LIU B, HUANG Y G, et al. Mechanical properties of unidirectional nanocomposites with non-uniformly or randomly staggered platelet distribution[J]. Journal of the Mechanics and Physics of Solids,2010,58(10):1646-1660. doi: 10.1016/j.jmps.2010.07.004
|
[54] |
GAO H J. Application of fracture mechanics concepts to hierarchical biomechanics of bone and bone-like materials[J]. International Journal of Fracture,2006,138(1-4):101-137. doi: 10.1007/s10704-006-7156-4
|
[55] |
CHEN B, WU P D, GAO H J. A characteristic length for stress transfer in the nanostructure of biological composites[J]. Composites Science and Technology,2009,69(7–8):1160-1164.
|
[56] |
YAO H M, SONG Z G, XU Z P, et al. Cracks fail to intensify stress in nacreous composites[J]. Composites Science and Technology,2013,81:24-29. doi: 10.1016/j.compscitech.2013.03.016
|
[57] |
CUI S K, YANG Z Y, LU Z X. An analytical model for the bio-inspired nacreous composites with interlocked “brick-and-mortar”structures[J]. Composites Science and Technology,2020,193:108131. doi: 10.1016/j.compscitech.2020.108131
|
[58] |
WEI X D, NARAGHI M, ESPINOSA H D. Optimal length scales emerging from shear load transfer in natural materials: Application to carbon-based nanocomposite design[J]. ACS Nano,2012,6(3):2333-2344. doi: 10.1021/nn204506d
|
[59] |
NI Y, SONG Z Q, JIANG H Y, et al. Optimization design of strong and tough nacreous nanocomposites through tuning characteristic lengths[J]. Journal of the Mechanics and Physics of Solids,2015,81:41-57. doi: 10.1016/j.jmps.2015.04.013
|
[60] |
YANG W C, ZHANG X F, CHEN Y L, et al. Strength analysis of bio-inspired composites reinforced by regularly and randomly staggered platelets[J]. Composite Structures,2019,216:415-426. doi: 10.1016/j.compstruct.2019.03.007
|
[61] |
BARTHELAT F, YIN Z, BUEHLER M J. Structure and mechanics of interfaces in biological materials[J]. Nature Reviews Materials,2016,1(4):1-16.
|
[62] |
王振兴, 原梅妮, 李立州, 等. 贝壳珍珠母增韧机理研究进展[J]. 材料导报, 2015, 29(8):98-102.
WANG Zhenxing, YUAN Meini, LI Lizhou, et al. Research progress of toughening mechanisms of nacre shell[J]. Materials Review,2015,29(8):98-102(in Chinese).
|
[63] |
LIU J J, ZHU W Q, YU Z L, et al. Dynamic shear-lag model for understanding the role of matrix in energy dissipation in fiber-reinforced composites[J]. Acta Biomaterialia,2018,74:270-279. doi: 10.1016/j.actbio.2018.04.031
|
[64] |
YU Z L, LIU J J, ZHU W Q, et al. Optimizing mechanical properties of bio-inspired composites through functionally graded matrix and microstructure design[J]. Composite Structures,2018,206:621-627. doi: 10.1016/j.compstruct.2018.08.064
|
[65] |
PIMENTA S, ROBINSON P. An analytical shear-lag model for composites with ‘brick-and-mortar’architecture considering non-linear matrix response and failure[J]. Composites Science and Technology,2014,104:111-124. doi: 10.1016/j.compscitech.2014.09.001
|
[66] |
ALMASKARI N S, MCADAMS D A, REDDY J N. Modeling of a biological material nacre: Waviness stiffness model[J]. Materials Science and Engineering C,2017,70:772-776. doi: 10.1016/j.msec.2016.09.061
|
[67] |
ALMASKARI N S, MCADAMS D A, REDDY J N. Modeling of a biological material nacre: Waviness toughness model[J]. Mechanics of Advanced Materials and Structures,2018,26(9):1-7.
|
[68] |
BARTHELAT F, ZHU D J. A novel biomimetic material duplicating the structure and mechanics of natural nacre[J]. Journal of Materials Research,2011,26(10):1203-1215. doi: 10.1557/jmr.2011.65
|
[69] |
ASKARINEJAD S, CHOSHALI H A, FLAVIN C, et al. Effects of tablet waviness on the mechanical response of architected multilayered materials: Modeling and experiment[J]. Composite Structures,2018,195:118-125. doi: 10.1016/j.compstruct.2018.04.047
|
[70] |
LIU F, LI T T, JIA Z, et al. Combination of stiffness, strength, and toughness in 3D printed interlocking nacre-like composites[J]. Extreme Mechanics Letters,2019,35:100621.
|
[71] |
GHAZLAN A, NGO T D, TRAN P. Influence of interfacial geometry on the energy absorption capacity and load sharing mechanisms of nacreous composite shells[J]. Composite Structures,2015,132:299-309. doi: 10.1016/j.compstruct.2015.05.045
|
[72] |
CUI S k, LU Z X, YANG Z Y. Effect of interlocking structure on mechanical properties of bio-inspired nacreous composites[J]. Composite Structures,2019,226:111260. doi: 10.1016/j.compstruct.2019.111260
|
[73] |
PRO J W, BARTHELAT F. The fracture mechanics of biological and bioinspired materials[J]. MRS Bulletin,2019,44(1):46-52.
|
[74] |
RABIEI R, BEKAH S, BARTHELAT F. Failure mode transition in nacre and bone-like materials[J]. Acta Biomaterialia,2010,6(10):4081-4089. doi: 10.1016/j.actbio.2010.04.008
|
[75] |
BARTHELAT F, RABIEI R. Toughness amplification in natural composites[J]. Journal of The Mechanics and Physics of Solids,2011,59(4):829-840. doi: 10.1016/j.jmps.2011.01.001
|
[76] |
YAN Y, NAKATANI A. Stability controlled crack initiation in nacre-like composite materials[J]. Journal of the Mechanics and Physics of Solids,2019,125:591-612. doi: 10.1016/j.jmps.2019.01.003
|
[77] |
YAN Y, NAKATANI A. Unlocalized crack initiation and propagation in staggered biomaterials[J]. Journal of Biomechanics,2019,86:183-192. doi: 10.1016/j.jbiomech.2019.02.003
|
[78] |
YAN Y, NAKATANI A. Crack sensitivity of nacre-like laminate composite materials: Monte carlo simulation based on stability theory[J]. International Journal of Solids and Structures,2020,202:646-659. doi: 10.1016/j.ijsolstr.2020.06.043
|
[79] |
MENG Q H, LI B, LI T, et al. A multiscale crack-bridging model of cellulose nanopaper[J]. Journal of the Mechanics and Physics of Solids,2017,103:22-39.
|
[80] |
SHAO Y, ZHAO H P, FENG X Q, et al. Discontinuous crack-bridging model for fracture toughness analysis of nacre[J]. Journal of the Mechanics and Physics of Solids,2012,60(8):1400-1419. doi: 10.1016/j.jmps.2012.04.011
|
[81] |
SHAO Y, ZHAO H P, FENG X Q. On flaw tolerance of nacre: A theoretical study[J]. Journal of the Royal Society Interface,2014,11(92):20131016. doi: 10.1098/rsif.2013.1016
|
[82] |
YU Z L, LIU J J, WEI X D. Unraveling crack stability and strain localization in staggered composites by fracture analysis on the shear-lag model[J]. Composites Science and Technology,2018,156:262-268. doi: 10.1016/j.compscitech.2017.12.035
|
[83] |
YU Z L, LIU J J, WEI X D. A general property-structure relationship from crack stability analysis on hybrid staggered composites with elasto-plastic matrices[J]. Composite Structures,2020,240:112071. doi: 10.1016/j.compstruct.2020.112071
|
[84] |
FRATZL P, GUPTA H S, FISCHER F D, et al. Hindered crack propagation in materials with periodically varying young’s modulus: Lessons from biological materials[J]. Advanced Materials,2007,19(18):2657-2661. doi: 10.1002/adma.200602394
|
[85] |
吴为, 徐柄桐, 张荣霞, 等. 交叠增韧仿生复合材料的研究进展[J]. 材料导报, 2016, 30(19):1-6.
WU Wei, XU Bingtong, ZHANG Rongxia, et al. State-of-the-art in biomimetic composites toughened by overlapping[J]. Materials Review,2016,30(19):1-6(in Chinese).
|
[86] |
SEN D, BUEHLER M J. Structural hierarchies define toughness and defect-tolerance despite simple and mechanically inferior brittle building blocks[J]. Scientific Reports,2011,1:35.
|
[87] |
DIMAS L S, BUEHLER M J. Influence of geometry on mechanical properties of bio-inspired silica-based hierarchical materials[J]. Bioinspiration & Biomimetics,2012,7(3):036024.
|
[88] |
DIMAS L S, BUEHLER M J. Tough and stiff composites with simple building blocks[J]. Journal of Materials Research,2013,28(10):1295-1303. doi: 10.1557/jmr.2013.88
|
[89] |
MIRZAEIFAR R, DIMAS L S, QIN Z, et al. Defect-tolerant bioinspired hierarchical composites: Simulation and experiment[J]. ACS Biomaterials Science and Engineering,2015,1(5):295-304. doi: 10.1021/ab500120f
|
[90] |
MATHIAZHAGAN S, ANUP S. Influence of platelet aspect ratio on the mechanical behaviour of bio-inspired nanocomposites using molecular dynamics[J]. Journal of the Mechanical Behavior of Biomedical Materials,2016,59:21-40. doi: 10.1016/j.jmbbm.2015.12.008
|
[91] |
MATHIAZHAGAN S, ANUP S. Atomistic simulations of length-scale effect of bioinspired brittle-matrix nanocomposite models[J]. Journal of Engineering Mechanics,2018,144(11):04018104. doi: 10.1061/(ASCE)EM.1943-7889.0001533
|
[92] |
MATHIAZHAGAN S, ANUP S. Effect of interface strength on the mechanical behaviour of bio-inspired composites: A molecular dynamics study[J]. Mechanics of Materials,2019,132:93-100. doi: 10.1016/j.mechmat.2019.02.016
|
[93] |
YANG Z Y, WANG D D, LU Z X, et al. Atomistic simulation on the plastic deformation and fracture of bio-inspired graphene/Ni nanocomposites[J]. Applied Physics Letters,2016,109(19):191909. doi: 10.1063/1.4967793
|
[94] |
LAI Z B, BAI R X, LEI Z K, et al. Interfacial mechanical behaviour of protein-mineral nanocomposites: A molecular dynamics investigation[J]. Journal of Biomechanics,2018,73:161-167. doi: 10.1016/j.jbiomech.2018.03.044
|
[95] |
LIU N, ZENG X W, PIDAPARTI R, et al. Tough and strong bioinspired nanocomposites with interfacial cross-links[J]. Nanoscale,2016,8(43):18531-18540. doi: 10.1039/C6NR06379A
|
[96] |
LEMANIS R, ZLOTNIKOV I. Finite element analysis as a method to study molluscan shell mechanics[J]. Advanced Engineering Materials,2018,20(3):1700939. doi: 10.1002/adem.201700939
|
[97] |
ZHANG Y M, YAO H M, ORTIZ C, et al. Bio-inspired interfacial strengthening strategy through geometrically interlocking designs[J]. Journal of the Mechanical Behavior of Biomedical Materials,2012,15:70-77. doi: 10.1016/j.jmbbm.2012.07.006
|
[98] |
FLORES-JOHNSON E A, SHEN L M, GUIAMATSIA I, et al. Numerical investigation of the impact behaviour of bioinspired nacre-like aluminium composite plates[J]. Composites Science and Technology,2014,96:13-22. doi: 10.1016/j.compscitech.2014.03.001
|
[99] |
FLORES-JOHNSON E A, SHEN L M, GUIAMATSIA I, et al. A numerical study of bioinspired nacre-like composite plates under blast loading[J]. Composite Structures,2015,126:329-336. doi: 10.1016/j.compstruct.2015.02.083
|
[100] |
TRAN P, NGO T D, MENDIS P. Bio-inspired composite structures subjected to underwater impulsive loading[J]. Computational Materials Science,2014,82:134-139. doi: 10.1016/j.commatsci.2013.09.033
|
[101] |
GHAZLAN A, NGO T D, TRAN P. Three-dimensional Voronoi model of a nacre-mimetic composite structure under impulsive loading[J]. Composite Structures,2016,153:278-296. doi: 10.1016/j.compstruct.2016.06.020
|
[102] |
TRAN P, NGO T D, GHAZLAN A, et al. Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings[J]. Composites Part B: Engineering,2017,108:210-223. doi: 10.1016/j.compositesb.2016.09.083
|
[103] |
GHAZLAN A, NGO T D, TRAN P. Influence of geometric and material parameters on the behavior of nacreous composites under quasi-static loading[J]. Composite Structures,2018,183:457-482. doi: 10.1016/j.compstruct.2017.05.015
|
[104] |
WU K J, ZHENG Z J, ZHANG S S, et al. Interfacial strength-controlled energy dissipation mechanism and optimization in impact-resistant nacreous structure[J]. Materials & Design,2019,163:107532.
|
[105] |
CHANDLER M Q, CHENG J C. Discrete element modeling of microstructure of nacre[J]. Computational Particle Mechanics,2018,5(2):191-201. doi: 10.1007/s40571-017-0162-7
|
[106] |
ABID N, MIRKHALAF M, BARTHELAT F. Discrete-element modeling of nacre-like materials: Effects of random microstructures on strain localization and mechanical performance[J]. Journal of the Mechanics and Physics of Solids,2018,112:385-402. doi: 10.1016/j.jmps.2017.11.003
|
[107] |
ABID N, PRO J W, BARTHELAT F. Fracture mechanics of nacre-like materials using discrete-element models: Effects of microstructure, interfaces and randomness[J]. Journal of the Mechanics and Physics of Solids,2019,124:350-365. doi: 10.1016/j.jmps.2018.10.012
|
[108] |
PRO J W, LIM R K, PETZOLD L R, et al. The impact of stochastic microstructures on the macroscopic fracture properties of brick and mortar composites[J]. Extreme Mechanics Letters,2015,5:1-9. doi: 10.1016/j.eml.2015.09.001
|
[109] |
LIM R K, PRO J W, BEGLEY M R, et al. High-performance simulation of fracture in idealized “brick and mortar”composites using adaptive monte carlo minimization on the GPU[J]. International Journal of High Performance Computing Applications,2016,30(2):186-199. doi: 10.1177/1094342015593395
|
[110] |
RADI K, JAUFFRÈS D, DEVILLE S, et al. Elasticity and fracture of brick and mortar materials using discrete element simulations[J]. Journal of the Mechanics and Physics of Solids,2019,126:101-116. doi: 10.1016/j.jmps.2019.02.009
|
[111] |
RADI K, JAUFFRES D, DEVILLE S, et al. Strength and toughness trade-off optimization of nacre-like ceramic composites[J]. Composites Part B: Engineering,2020,183:107699. doi: 10.1016/j.compositesb.2019.107699
|
[112] |
DEVILLE S, SAIZ E, TOMSIA A P. Using ice to mimic nacre: From structural applications to artificial bone[M]//BÄUERLEIN E. Handbook of biomineralization: Biomimetic and bioinspired chemistry. Weinheim: WILEY-VCH Verlag GmbH & Co. KGaA, 2007: 175-192.
|
[113] |
SARIKAYA M, AKSAY I A. Nacre of abalone shell: A natural multifunctional nanolaminated ceramic-polymer composite material[M]//CASE S T. Structure, cellular synthesis and assembly of biopolymers. Berlin: Springer Press, 1992: 1–26.
|
[114] |
KATTI K S, KATTI D R, MOHANTY B. Biomimetic lessons learnt from nacre[M]//MUKHERJEE A. Biomimetics learning from nature. Rijeka: InTech, 2010: 193-216.
|
[115] |
MAYER G. Rigid biological systems as models for synthetic composites[J]. Science,2005,310(5751):1144-1147. doi: 10.1126/science.1116994
|
[116] |
孙娜, 吴俊涛, 江雷. 贝壳珍珠层及其仿生材料的研究进展[J]. 高等学校化学学报, 2011, 32(10):2231-2239.
SUN Na, WU Juntao, JIANG Lei. Research progress of nacre and biomimetic synthesis of nacre-like materials[J]. Chemical Journal of Chinese Universities,2011,32(10):2231-2239(in Chinese).
|
[117] |
DEVILLE S, SAIZ E, NALLA R K, et al. Freezing as a path to build complex composites[J]. Science,2006,311(5760):515-518. doi: 10.1126/science.1120937
|
[118] |
BOUVILLE F, MAIRE E, MEILLE S, et al. Strong, tough and stiff bioinspired ceramics from brittle constituents[J]. Nature Materials,2014,13(5):508-514. doi: 10.1038/nmat3915
|
[119] |
MUNCH E, LAUNEY M E, ALSEM D H, et al. Tough, bio-inspired hybrid materials[J]. Science,2008,322(5907):1516-1520. doi: 10.1126/science.1164865
|
[120] |
MAO L B, GAO H L, YAO H B, et al. Synthetic nacre by predesigned matrix-directed mineralization[J]. Science,2016,354(6308):107-110. doi: 10.1126/science.aaf8991
|
[121] |
NARDUCCI F, PINHO S T. Exploiting nacre-inspired crack deflection mechanisms in CFRP via micro-structural design[J]. Composites Science and Technology,2017,153:178-189. doi: 10.1016/j.compscitech.2017.08.023
|
[122] |
NARDUCCI F, PINHO S T. Interaction between nacre-like CFRP mesolayers and long-fibre interlayers[J]. Composite Structures,2018,200:921-928. doi: 10.1016/j.compstruct.2018.05.103
|
[123] |
NARDUCCI F, LEE K, PINHO S T. Realising damage-tolerant nacre-inspired CFRP[J]. Journal of the Mechanics and Physics of Solids,2018,116:391-402. doi: 10.1016/j.jmps.2018.04.004
|
[124] |
SHAO G F, HANAOR D, SHEN X D, et al. Freeze casting: From low-dimensional building blocks to aligned porous structures: A review of novel materials, methods, and applications[J]. Advanced Materials,2020,32(17):1907176. doi: 10.1002/adma.201907176
|
[125] |
BONDERER L J, STUDART A R, GAUCKLER L J. Bioinspired design and assembly of platelet reinforced polymer films[J]. Science,2008,319(5866):1069-1073. doi: 10.1126/science.1148726
|
[126] |
RODRIGUES J R, ALVES N M, MANO J F. Nacre-inspired nanocomposites produced using layer-by-layer assembly: Design strategies and biomedical applications[J]. Materials Science and Engineering C,2017,76:1263-1273. doi: 10.1016/j.msec.2017.02.043
|
[127] |
LI Y Q, YU T, YANG T Y, et al. Bio-inspired nacre-like composite films based on graphene with superior mechanical, electrical, and biocompatible properties[J]. Advanced Materials,2012,24(25):3426-3431. doi: 10.1002/adma.201200452
|
[128] |
SELLINGER A, WEISS P M, NGUYEN A, et al. Continuous self-assembly of organic-inorganic nanocomposite coatings that mimic nacre[J]. Nature,1998,394(6690):256-260. doi: 10.1038/28354
|
[129] |
TRITSCHLER U, COLFEN H. Self-assembled hierarchically structured organic-inorganic composite systems[J]. Bioinspiration & Biomimetics,2016,11(3):035002.
|
[130] |
CHEN L, BALLARINI R, KAHN H, et al. Bioinspired micro-composite structure[J]. Journal of Materials Research,2007,22(1):124-131. doi: 10.1557/jmr.2007.0016
|
[131] |
赵赫威, 郭林. 仿贝壳珍珠母层状复合材料的制备及应用[J]. 科学通报, 2017, 62(6):576-589. doi: 10.1360/N972016-00754
ZHAO Hewei, GUO Lin. Synthesis and applications of layered structural composites inspired by nacre[J]. Chinese Science Bulletin,2017,62(6):576-589(in Chinese). doi: 10.1360/N972016-00754
|
[132] |
WAT A, FERRARO C, DENG X, et al. Bioinspired nacre-like alumina with a metallic nickel vompliant phase fabricated by spark-plasma sintering[J]. Small,2019,15(31):1900573. doi: 10.1002/smll.201900573
|
[133] |
WAT A, LEE J I, RYU C W, et al. Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase[J]. Nature Communications,2019,10(1):961. doi: 10.1038/s41467-019-08753-6
|
[134] |
SUN M Q, SHEN P, JIANG Q C. Microstructures and mechanical characterizations of high-performance nacre-inspired Al/Al2O3 composites[J]. Composites Part A: Applied Science and Manufacturing,2019,121:465-473. doi: 10.1016/j.compositesa.2019.04.007
|
[135] |
GROSSMAN M, PIVOVAROV D, BOUVILLE F, et al. Hierarchical toughening of nacre-like composites[J]. Advanced Functional Materials,2019,29(9):1806800. doi: 10.1002/adfm.201806800
|
[136] |
TANG Z Y, KOTOV N A, MAGONOV S, et al. Nanostructured artificial nacre[J]. Nature Materials,2003,2(6):413-418. doi: 10.1038/nmat906
|
[137] |
WALTHER A, BJURHAGER I, MALHO J M, et al. Supramolecular control of stiffness and strength in lightweight high-performance nacre-mimetic paper with fire-shielding properties[J]. Angewandte Chemie International Edition,2010,49(36):6448-6453. doi: 10.1002/anie.201001577
|
[138] |
CHEN P Y, MCKITTRICK J, MEYERS M A. Biological materials: Functional adaptations and bioinspired designs[J]. Progress in Materials Science,2012,57(8):1492-1704. doi: 10.1016/j.pmatsci.2012.03.001
|
[139] |
SARVESTANI H Y, MIRKHALAF M, AKBARZADEH A H, et al. Multilayered architectured ceramic panels with weak interfaces: Energy absorption and multi-hit capabilities[J]. Materials & Design,2019,167:107627.
|
[140] |
MIAO T Y, SHEN L M, XU Q F, et al. Ballistic performance of bioinspired nacre-like aluminium composite plates[J]. Composites Part B: Engineering,2019,177:107382. doi: 10.1016/j.compositesb.2019.107382
|
[141] |
JAVAN A R, SEIFI H, XU S, et al. The impact behaviour of plate-like assemblies made of new interlocking bricks: An experimental study[J]. Materials & Design,2017,134:361-373.
|
[142] |
JAVAN A R, SEIFI H, XU S, et al. Impact behaviour of plate-like assemblies made of new and existing interlocking bricks: A comparative study[J]. International Journal of Impact Engineering,2018,116:79-93. doi: 10.1016/j.ijimpeng.2018.02.008
|
[143] |
REZAEE JAVAN A, SEIFI H, LIN X S, et al. Mechanical behaviour of composite structures made of topologically interlocking concrete bricks with soft interfaces[J]. Materials & Design,2020,186:108347.
|
[144] |
MIRKHALAF M, ZHOU T, BARTHELAT F. Simultaneous improvements of strength and toughness in topologically interlocked ceramics[J]. Proceedings of the National Academy of Sciences,2018,115(37):9128-9133. doi: 10.1073/pnas.1807272115
|
[145] |
MIRKHALAF M, TANGUAY J, BARTHELAT F. Carving 3D architectures within glass: Exploring new strategies to transform the mechanics and performance of materials[J]. Extreme Mechanics Letters,2016,7:104-113. doi: 10.1016/j.eml.2016.02.016
|
[146] |
吴和成, 肖毅华. 陶瓷和仿珍珠母陶瓷/聚脲复合结构的冲击损伤对比[J]. 高压物理学报, 2020, 34(2):024201. doi: 10.11858/gywlxb.20190808
WU Hecheng, XIAO Yihua. Comparison of impact damage between ceramic structure and nacre-like ceramic/polyurea composite structure[J]. Chinese Journal of High Pressure Physics,2020,34(2):024201(in Chinese). doi: 10.11858/gywlxb.20190808
|
[147] |
DIMAS L S, BRATZEL G H, EYLON I, et al. Tough composites inspired by mineralized natural materials: Computation, 3D printing, and testing[J]. Advanced Functional Materials,2013,23(36):4629-4638. doi: 10.1002/adfm.201300215
|
[148] |
DIMAS L S, BUEHLER M J. Modeling and additive manufacturing of bio-inspired composites with tunable fracture mechanical properties[J]. Soft Matter,2014,10(25):4436-4442. doi: 10.1039/c3sm52890a
|
[149] |
NGO T D, KASHANI A, IMBALZANO G, et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges[J]. Composites Part B: Engineering,2018,143:172-196. doi: 10.1016/j.compositesb.2018.02.012
|
[150] |
YANG Y, SONG X, LI X J, et al. Recent progress in biomimetic additive manufacturing technology: From materials to functional structures[J]. Advanced Materials,2018,30(36):1706539. doi: 10.1002/adma.201706539
|
[151] |
GU G X, TAKAFFOLI M, HSIEH A J, et al. Biomimetic additive manufactured polymer composites for improved impact resistance[J]. Extreme Mechanics Letters,2016,9:317-323. doi: 10.1016/j.eml.2016.09.006
|
[152] |
GU G X, TAKAFFOLI M, BUEHLER M J. Hierarchically enhanced impact resistance of bioinspired composites[J]. Advanced Materials,2017,29(28):1700060. doi: 10.1002/adma.201700060
|
[153] |
KO K, JIN S, LEE S E, et al. Bio-inspired bimaterial composites patterned using three-dimensional printing[J]. Composites Part B: Engineering,2019,165:594-603. doi: 10.1016/j.compositesb.2019.02.008
|
[154] |
FRØLICH S, WEAVER J C, DEAN M N, et al. Uncovering nature’s design strategies through parametric modeling, multi-material 3D printing, and mechanical testing[J]. Advanced Engineering Materials,2017,19(6):1600848.
|
[155] |
MARTINI R, BALIT Y, BARTHELAT F. A comparative study of bio-inspired protective scales using 3D printing and mechanical testing[J]. Acta Biomaterialia,2017,55:360-372. doi: 10.1016/j.actbio.2017.03.025
|
[156] |
DJUMAS L, SIMON G P, ESTRIN Y, et al. Deformation mechanics of non-planar topologically interlocked assemblies with structural hierarchy and varying geometry[J]. Scientific Reports,2017,7(1):1-11. doi: 10.1038/s41598-016-0028-x
|
[157] |
STUDART A R. Biological and bioinspired composites with spatially tunable heterogeneous architectures[J]. Advanced Functional Materials,2013,23(36):4423-4436. doi: 10.1002/adfm.201300340
|
[158] |
GU G X, SU I, SHARMA S, et al. Three-dimensional-printing of bio-inspired composites[J]. Journal of Biomechanical Engineering,2016,138(2):021006. doi: 10.1115/1.4032423
|
[159] |
NALEWAY S E, PORTER M M, MCKITTRICK J, et al. Structural design elements in biological materials: Application to bioinspiration[J]. Advanced Materials,2015,27(37):5455-5476. doi: 10.1002/adma.201502403
|
[160] |
LIU Z Q, MEYERS M A, ZHANG Z F, et al. Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications[J]. Progress in Materials Science,2017,88:467-498. doi: 10.1016/j.pmatsci.2017.04.013
|
[161] |
温变英. 自然界中的梯度材料及其仿生研究[J]. 材料导报, 2008, 22(s2):351-356.
WEN Bianying. Naturally functionally gradient materials and their biomimetic study[J]. Materials Review,2008,22(s2):351-356(in Chinese).
|
[162] |
GIBSON L J. The hierarchical structure and mechanics of plant materials[J]. Journal of the Royal Society Interface,2012,9(76):2749-2766. doi: 10.1098/rsif.2012.0341
|
[163] |
WEAVER J C, MILLIRON G W, MISEREZ A, et al. The stomatopod dactyl club: A formidable damage-tolerant biological hammer[J]. Science,2012,336(6086):1275-1280. doi: 10.1126/science.1218764
|
[164] |
CHAN Y L, NGAN A H W, KING N M. Nano-scale structure and mechanical properties of the human dentine-enamel junction[J]. Journal of The Mechanical Behavior of Biomedical Materials,2011,4(5):785-795. doi: 10.1016/j.jmbbm.2010.09.003
|
[165] |
FANG J G, GAO Y K, AN X Z, et al. Design of transversely-graded foam and wall thickness structures for crashworthiness criteria[J]. Composites Part B: Engineering,2016,92:338-349. doi: 10.1016/j.compositesb.2016.02.006
|
[166] |
WANG C Y, LI Y, ZHAO W Z, et al. Structure design and multi-objective optimization of a novel crash box based on biomimetic structure[J]. International Journal of Mechanical Sciences,2018,138-139:489-501.
|
[167] |
MENCATTELLI L, PINHO S T. Realising bio-inspired impact damage-tolerant thin-ply CFRP Bouligand structures via promoting diffused sub-critical helicoidal damage[J]. Composites Science and Technology,2019,182:107684. doi: 10.1016/j.compscitech.2019.107684
|
[168] |
MENCATTELLI L, PINHO S T. Ultra-thin-ply CFRP Bouligand bio-inspired structures with enhanced load-bearing capacity, delayed catastrophic failure and high energy dissipation capability[J]. Composites Part A: Applied Science and Manufacturing,2020,129:105655. doi: 10.1016/j.compositesa.2019.105655
|
[169] |
MIRZAALI M J, SALDIVAR M C, NAVA A H D L, et al. Multi-material 3D printing of functionally graded hierarchical soft-hard composites[J]. Advanced Engineering Materials,2020,22(7):1901142.
|
[170] |
MIRZAALI M J, NAVA A H D L, GUNASHEKAR D, et al. Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing[J]. Composite Structures,2020,237:111867. doi: 10.1016/j.compstruct.2020.111867
|
[171] |
TAPSE S, ANUP S. Bio-inspired composites with functionally graded platelets exhibit enhanced stiffness[J]. Bioinspiration & Biomimetics,2017,13(1):016011.
|
[172] |
GUO X, GAO H J. Bio-inspired material design and optimization[C]//IUTAM Symposium on Topological Design Optimization of Structures, Machines and Materials. Dordrecht: Springer Publishers, 2006, 137: 439-453.
|
[173] |
AL-MASKARI N S, MCADAMS D A, REDDY J N. Modeling of a biological material nacre: Multi-objective optimization model[J]. Mechanics of Advanced Materials and Structures,2019:DOI: 10.1080/15376494.2019.1568649.
|
[174] |
COSTAGLIOLA G, GUARINO R, BOSIA F, et al. Evolutionary algorithm optimization of staggered biological or biomimetic composites using the random fuse model[J]. Physical Review Applied,2020,13(3):034049. doi: 10.1103/PhysRevApplied.13.034049
|
[175] |
WANG Z, CHEGDANI F, YALAMARTI N, et al. Acoustic emission characterization of natural fiber reinforced plastic composite machining using a random forest machine learning model[J]. Journal of Manufacturing Science and Engineering-,2020,142(3):031003. doi: 10.1115/1.4045945
|
[176] |
DAGHIGH V, LACY T E, DAGHIGH H, et al. Heat deflection temperatures of bio-nano-composites using experiments and machine learning predictions[J]. Materials Today Communications,2020,22:100789. doi: 10.1016/j.mtcomm.2019.100789
|
[177] |
GU G X, CHEN C, RICHMOND D J, et al. Bioinspired hierarchical composite design using machine learning: Simulation, additive manufacturing, and experiment[J]. Materials Horizons,2018,5(5):939-945. doi: 10.1039/C8MH00653A
|
[178] |
CHEN C, GU G X. Effect of constituent materials on composite performance: Exploring design strategies via machine learning[J]. Advanced Theory and Simulations,2019,2(6):1900056.
|
[179] |
WANG D, PENG H Y, WU Y, et al. Bioinspired lamellar barriers for significantly improving the flame-retardant properties of nanocellulose composites[J]. ACS Sustainable Chemistry & Engineering,2020,8(11):4331-4336.
|
[180] |
LIU Y C, LU M P, HU Z R, et al. Casein phosphopeptide-biofunctionalized graphene oxide nanoplatelets based cellulose green nanocomposites with simultaneous high thermal conductivity and excellent flame retardancy[J]. Chemical Engineering Journal,2020,382:122733. doi: 10.1016/j.cej.2019.122733
|
[181] |
LI T T, WANG Y T, PENG H K, et al. Lightweight, flexible and superhydrophobic composite nanofiber films inspired by nacre for highly electromagnetic interference shielding[J]. Composites Part A: Applied Science and Manufacturing,2020,128:105685. doi: 10.1016/j.compositesa.2019.105685
|
[182] |
GAO W W, ZHAO N F, YU T, et al. High-efficiency electromagnetic interference shielding realized in nacre-mimetic graphene/polymer composite with extremely low graphene loading[J]. Carbon,2020,157:570-577. doi: 10.1016/j.carbon.2019.10.051
|
[183] |
DHAR P, PHIRI J, SZILVAY G R, et al. Genetically engineered protein based nacre-like nanocomposites with superior mechanical and electrochemical performance[J]. Journal of Materials Chemistry A,2020,8(2):656-669. doi: 10.1039/C9TA10881E
|
[184] |
WU C, ZHOU T Z, DU Y, et al. Strong bioinspired HPA-rGO nanocomposite films via interfacial interactions for flexible supercapacitors[J]. Nano Energy,2019,58:517-527. doi: 10.1016/j.nanoen.2019.01.055
|
[185] |
CUI S Q, SONG N, SHI L Y, et al. Enhanced thermal conductivity of bioinspired nanofibrillated cellulose hybrid films based on graphene sheets and nanodiamonds[J]. ACS Sustainable Chemistry & Engineering,2020,8(16):6363-6370.
|
[186] |
XIAO G, DI J T, LI H, et al. Highly thermally conductive, ductile biomimetic boron nitride/aramid nanofiber composite film[J]. Composites Science and Technology,2020,189:108021. doi: 10.1016/j.compscitech.2020.108021
|
[187] |
WANG Y J, XIA S, XIAO G, et al. High-loading boron nitride-based bio-Inspired paper with pastic-like ductility and metal-like thermal conductivity[J]. ACS Applied Materials & Interfaces,2020,12(11):13156-13164.
|
[188] |
HUANG C J, PENG J S, CHENG Y R, et al. Ultratough nacre-inspired epoxy-graphene composites with shape memory properties[J]. Journal of Materials Chemistry A,2019,7(6):2787-2794. doi: 10.1039/C8TA10725D
|
[189] |
PANG J H, WANG X P, LI L, et al. Tough and conductive bio-based artificial nacre via synergistic effect between water-soluble cellulose acetate and graphene[J]. Carbohydrate Polymers,2019,206:319-327. doi: 10.1016/j.carbpol.2018.10.116
|
[190] |
DU G L, MAO A R, YU J H, et al. Nacre-mimetic composite with intrinsic self-healing and shape-programming capability[J]. Nature Communications,2019,10(1):800. doi: 10.1038/s41467-019-08643-x
|