Citation: | DU Zhiming, FEI Yanhan, SUN Yonggen, et al. Development status and future of ceramic-metal co-continuous composite material[J]. Acta Materiae Compositae Sinica, 2021, 38(2): 315-338. doi: 10.13801/j.cnki.fhclxb.20200909.002 |
[1] |
STANKOVICH S, DIKIN D A, DOMMETT G H B, et al. Graphene-based composite materials[J]. Nature,2006,442(7100):282-286. doi: 10.1038/nature04969
|
[2] |
REZWAN K, CHEN Q Z, BLAKER J J, et al. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering[J]. Biomaterials,2006,27(18):3413-3431. doi: 10.1016/j.biomaterials.2006.01.039
|
[3] |
谭毅. 新材料概论[M]. 北京: 冶金工业出版社, 2004: 5.
TAN Yi. Introduction new materials[M]. Beijing: Metallurgical Industry Press, 2004: 5(in Chinese).
|
[4] |
吴人洁. 下世纪我国复合材料的发展机遇与挑战[J]. 复合材料学报, 2000, 17(1):1-4. doi: 10.3321/j.issn:1000-3851.2000.01.001
WU Renjie. The prospective opportunities and challenges of composite materials in China during the next century[J]. Acta Materiae Compositae Sinica,2000,17(1):1-4(in Chinese). doi: 10.3321/j.issn:1000-3851.2000.01.001
|
[5] |
YIP N Y, TIRAFERRI A, PHILLIP W A, et al. High performance thin-film composite forward osmosis membrane[J]. Environmental Science & Technology,2010,44(10):3812-3818.
|
[6] |
ZHANG Y, CHAN H F, LEONG K W. Advanced materials and processing for drug delivery: The past and the future[J]. Advanced Drug Delivery Reviews,2013,65(1):104-120. doi: 10.1016/j.addr.2012.10.003
|
[7] |
BALLAL D R, ZELINA J. Progress in aeroengine technology (1939-2003)[J]. Journal of Aircraft,2015,41(1):43-50.
|
[8] |
YVON P, CARRÉF. Structural materials challenges for advanced reactor systems[J]. Journal of Nuclear Materials,2009,385(2):217-222. doi: 10.1016/j.jnucmat.2008.11.026
|
[9] |
LIU W, JIANG X, SHAO Z, et al. A review on nanocarbon-reinforced Cu-matrix nanocomposites with high mechanical strengths[J]. Current Nanoence,2017,13(4):410-420.
|
[10] |
SHIN S E, KO Y J, BAE D H. Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures[J]. Composites,2016,106(12):66-73.
|
[11] |
MELENDEZ I M, NEUBAUER E, ANGERER P, et al. Influence of nano-reinforcements on the mechanical properties and microstructure of titanium matrix composites[J]. Composites Science & Technology,2011,71(8):1154-1162.
|
[12] |
MOASERI E, KARIMI M, BANIADAM M, et al. Improvements in mechanical properties of multi-walled carbon nanotube-reinforced epoxy composites through novel magnetic-assisted method for alignment of carbon nanotubes[J]. Composites Part A: Applied Science & Manufacturing,2014,64:228-233.
|
[13] |
SINGH T, PATNAIK A, SATAPATHY B K. Friction braking performance of nanofilled hybrid fiber reinforced phenolic composites: Influence of nanoclay and carbon nanotubes[J]. Nano Brief Reports & Reviews,2013,8(3):1-15.
|
[14] |
ZHANG X, ZHAO N Q, HE C N. The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design-A review[J]. Progress in Materials Science, 2020, 113: 100672.
|
[15] |
MANFREDI D, PAVESE M, BIAMINO S, et al. Microstructure and mechanical properties of co-continuous metal/ceramic composites obtained from reactive metal penetration of commercial aluminium alloys into cordierite[J]. Composites Part A: Applied Science & Manufacturing, 2010, 41(5): 639-645.
|
[16] |
RAMESH R, PRASANTH A S, RAGAVAN M, et al. SiC/aluminium co-continuous composite synthesized by reactive metal penetration[J]. Applied Mechanics and Materials, 2014, 592-594: 847-853.
|
[17] |
MANFREDI D, PAVESE M, BIAMINO S, et al. Preparation and properties of NiAl(Si)/Al2O3 co-continuous compo-sites obtained by reactive metal penetration[J]. Compo-sites Science and Technology, 2009, 69(11-12): 1777-1782.
|
[18] |
AGRAWAL P, CONLON K, BOWMAN K J, et al. Thermal residual stresses in co-continuous composites[J]. Acta Materialia, 2003, 51(4): 1143-1156.
|
[19] |
YIN Y, ZHAO F, SONG X, et al. Preparation and characterization of hydroxyap-atite/chitosan-gelatin network composite[J]. Journal of Applied Polymer Science, 2000, 77(13): 2929-2938.
|
[20] |
MYUNG D, WATERS D, WISEMAN M, et al. Progress in the development of interpenetrating polymer network hydrogels[J]. Polymers for Advanced Technologies,2008,19(6):647-657. doi: 10.1002/pat.1134
|
[21] |
ARAKI K, HALLORAN J W. Porous ceramic bodies with interconnected pore channels by a novel freeze casting technique[J]. Journal of the American Ceramic Society,2005,88(5):1108-1114. doi: 10.1111/j.1551-2916.2005.00176.x
|
[22] |
陈建春. 铝合金变质、细化、合金化材料及铝熔体物理净化材料的设计、工艺及应用研究[D]. 武汉: 武汉大学, 2011.
CHEN J C. Preparation, techniques and applications of Al alloys for modification, refining and alloying, and materials and filtrators for physical purifying[D]. Wuhan: Wuhan University, 2011(in Chinese).
|
[23] |
LV Y, LIU H, WANG Z, et al. Silver nanoparticle-decorated porous ceramic composite for water treatment[J]. Journal of Membrane Science,2009,331(1-2):50-56. doi: 10.1016/j.memsci.2009.01.007
|
[24] |
GARCIA-PENA I, HERNANDEZ S, AURIA R, et al. Correlation of biological activity and reactor performance in biofiltration of toluene with the fungus paecilomycesvariotii CBS115145[J]. Applied and Environmental Microbiology,2005,71(8):4280-4285. doi: 10.1128/AEM.71.8.4280-4285.2005
|
[25] |
HAART L G J D. Deposition and electrical properties of thin porous ceramic electrode layers for solid oxide fuel cell application[J]. Journal of the Electrochemical Society,1991,138(7):1970. doi: 10.1149/1.2085910
|
[26] |
ÖZGÜR E N, CÜNEYT T A. Preparation of porous Ca10(PO4)6(OH)2 and β-Ca3(PO4)2 bioceramics[J]. Journal of the American Ceramic Society,2000,83(7):1581-1584.
|
[27] |
LUKES P, CLUPEK M, BABICKY V, et al. Pulsed electrical discharge in water generated using porous-ceramic-coated electrodes[J]. IEEE Transactions on Plasma Science,2008,36(4):1146-1147. doi: 10.1109/TPS.2008.920945
|
[28] |
JULBE A, FARRUSSENG D, GUIZARD C. Porous ceramic membranes for catalytic reactors-Overview and new ideas[J]. Journal of Membrane Science,2001,181(1):3-20. doi: 10.1016/S0376-7388(00)00375-6
|
[29] |
OHJI T, FUKUSHIMA M. Macro-porous ceramics: Processing and properties[J]. International Materials Reviews,2012,57(2):115-131. doi: 10.1179/1743280411Y.0000000006
|
[30] |
ZHAO C, ZENG L F. Pressurelessly sintering silicon carbide with additives of holmium oxide and alumina[J]. Materials Research Bulletin,1995,30(3):265-270. doi: 10.1016/0025-5408(95)00004-6
|
[31] |
MATSUDA S, TAKAHASHI M. Fracture strength distribution of porous ceramics under quasi-static load[J]. Engineering Fracture Mechanics,2010,77(13):2601-2609. doi: 10.1016/j.engfracmech.2010.06.005
|
[32] |
KISELOV V S, LYTVYN P M, YUKHYMCHUK V O, et al. Synthesis and properties of porous SiC ceramics[J]. Journal of Applied Physics,2010,107(9):1-6.
|
[33] |
GUO X Z, YANG H. Sintering and microstructure of silicon carbide ceramic with Y3Al5O12 added by sol-gel method[J]. Journal of Zhejiang University Science B,2005,6(3):213-218.
|
[34] |
DIVECHA A P, FISHMAN S G, KARMARKAR S D. Silicon carbide reinforced aluminum-A formable composite[J]. Journal of Metals,2013,33(9):12-17.
|
[35] |
CAO J, RUSINA O, SIEBER H. Processing of porous TiO2-ceramics from biological performs γ-Al2O3→α-Al2O3[J]. Ceramics International,2004,30(7):1971-1974. doi: 10.1016/j.ceramint.2003.12.180
|
[36] |
KLAWITTER J J, HULBERT S F. Application of porous ceramics for the attachment of load bearing internal orthopedic applications[J]. Journal of Biomedical Materials Research Part A,2010,5(6):161-229.
|
[37] |
SCHWARTZWALDER K, SOMESS A V. Method of making porous ceramic articles: US, US 30900941[P]. 1963-05-21.
|
[38] |
COLOMBO P, HELLMANN J R. Ceramic foams from preceramic polymers[J]. Materials Research Innovations,2002,6(5-6):260-272. doi: 10.1007/s10019-002-0209-z
|
[39] |
BERNARDO E, COLOMBO P, MANIAS E. SiOC glass modified by montmorillonite clay[J]. Ceramics International,2006,32(6):679-686. doi: 10.1016/j.ceramint.2005.05.002
|
[40] |
ZHANG X Z, WANG R J, LIU G W, et al. Preparation of silicon carbide reticulated porous ceramics by organic foam impregnation[J]. Materials Science Forum,2015,814:574-578. doi: 10.4028/www.scientific.net/MSF.814.574
|
[41] |
OKADA K, ISOBE T, KATSUMATA K I, et al. Porous ceramics mimicking nature-preparation and properties of microstructures with unidirectionally oriented pores[J]. Science & Technology of Advanced Materials,2011,12(6):064701.
|
[42] |
LIU B, DONG Y S, LIN P H, et al. Preparation of polyphosphate porous bioceramics and in vitro cytocompatibility[J]. Journal of Inorganic Materials,2011,26(7):759-764. doi: 10.3724/SP.J.1077.2011.00759
|
[43] |
SHANG S S, HE X, YANG Y, et al. Preparation of Ti2AlN porous ceramics by organic foam impregnation process[J]. Key Engineering Materials,2016,697:163-168. doi: 10.4028/www.scientific.net/KEM.697.163
|
[44] |
WANG J, ZHAO J. Investigating the effect of SPRM on mechanical strength and thermal conductivity of highly porous alumina ceramics[J]. Ceramics International,2017,43(18):16430-16435. doi: 10.1016/j.ceramint.2017.09.022
|
[45] |
ZUO K H, ZHANG Y, ZENG Y P, et al. Pore-forming agent induced microstructure evolution of freeze casted hydroxyapatite[J]. Ceramics International,2011,37(1):407-410. doi: 10.1016/j.ceramint.2010.08.015
|
[46] |
QIAN H, CHENG X, ZHANG H, et al. Preparation of porous mullite ceramics using fly ash cenosphere as a pore-forming agent by gelcasting process[J]. International Journal of Applied Ceramic Technology,2014,11(5):858-863. doi: 10.1111/ijac.12204
|
[47] |
ZUZANA Z V, LOCS J, KEUPER M, et al. Microstructural comparison of porous oxide ceramics from the system Al2O3-ZrO2 prepared with starch as a pore-forming agent[J]. Journal of the European Ceramic Society,2012,32(10):2163-2172. doi: 10.1016/j.jeurceramsoc.2012.02.005
|
[48] |
HAN F, ZHONG Z, ZHANG F, et al. Preparation and characterization of SiC whisker-reinforced SiC porous ceramics for hot gas filtration[J]. Industrial & Engineering Chemistry Research,2015,54(1):226-232.
|
[49] |
COLOMBO P. Engineering porosity in polymer-derived ceramics[J]. Journal of the European Ceramic Society,2008,28:1389-1395. doi: 10.1016/j.jeurceramsoc.2007.12.002
|
[50] |
WANG C, KASUGA T, NOGAMI M. Macroporous Calcium phosphate glass-ceramic prepared by two-step pressing technique and using sucrose as a pore former[J]. Journal of Materials Science: Materials in Medicine,2005,16:739-744. doi: 10.1007/s10856-005-2611-8
|
[51] |
BAI J G, YANG X H, SHI Y G, et al. Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming agent[J]. Materials Letters,2012,78:192-194. doi: 10.1016/j.matlet.2012.03.046
|
[52] |
ZHANG Y M, HU L Y, HAN J C, et al. Freeze casting of aqueous alumina slurries with glycerol for porous ceramics[J]. Ceramics International,2010,36:617-621. doi: 10.1016/j.ceramint.2009.09.036
|
[53] |
吕咏梅. 发泡剂的研究现状与发展趋势[J]. 橡胶科技, 2005, 3(6):53-56.
LV Yongmei. Present study situation and development tendency of blowing agents[J]. Plastics Science & Technology,2005,3(6):53-56(in Chinese).
|
[54] |
赵国玺. 表面活性剂物理化学[M]. 北京: 北京大学出版社, 1984: 35-48.
ZHAO Guoxi. Physico-chemistry of surfactants[M]. Beijing: Peking University Press, 1984: 35-48(in Chinese).
|
[55] |
SEPULVEDA P, BINNER J G P. Processing of cellular ceramics by foaming and in situ polymerization of organic monomers[J]. Journal of the European Ceramic Society,1999,19(12):2059-2066. doi: 10.1016/S0955-2219(99)00024-2
|
[56] |
KIM Y W, PARK C B. Processing of microcellular preceramics using carbon dioxide[J]. Composites Science and Technology,2003,63(16):2371-2377. doi: 10.1016/S0266-3538(03)00270-7
|
[57] |
YUAN L, HE Z B, YU J K. Fabrication of Al2O3-based porous ceramic with closed pores by superplastic high-temperature foaming method[J]. Journal of Northeastern University,2013,34(7):939-943.
|
[58] |
GONZENBACH U T, STUDART A R, TERVOORT E, et al. Macroporous ceramics from particle-stabilized wet foams[J]. Journal of the American Ceramic Society,2007,90(1):16-22. doi: 10.1111/j.1551-2916.2006.01328.x
|
[59] |
HE X, SU B, TANG Z H, ZHAO B, et al. The comparison of macroporous ceramics fabricated through the protein direct foaming and sponge replica methods[J]. Journal of Porous Materials,2012,19(5):761-766. doi: 10.1007/s10934-011-9528-z
|
[60] |
BARG S, SOLTMANN C, ANDRADE M, et al. Cellular ceramics by direct foaming of emulsified ceramic powder suspensions[J]. Journal of the American Ceramic Society,2008,91(9):2823-2829. doi: 10.1111/j.1551-2916.2008.02553.x
|
[61] |
JIN G Q, GUO X Y. Synthesis and characterization of mesoporous silicon carbide[J]. Microporous & Mesoporous Materials,2003,60(1-3):207-212.
|
[62] |
SIMONENKO E P, SIMONENKO N P, PAPYNOV E K, et al. Preparation of porous SiC-ceramics by sol-gel and spark plasma sintering[J]. Journal of Sol-Gel Science and Technology,2017,82(3):748-759. doi: 10.1007/s10971-017-4367-2
|
[63] |
黄剑锋. 溶胶-凝胶原理与技术[M]. 北京: 化学工业出版社, 2005: 13-20.
HUANG Jianfeng. Principle and technology of sol-gel[M]. Beijing: Chemical Industry Press, 2005: 13-20(in Chinese).
|
[64] |
KRESGE C T, LEONOWICZ M E, ROTH W J, et al. Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism[J]. Nature,1992,359(6397):710-712. doi: 10.1038/359710a0
|
[65] |
ALLAN S, STUART W C, MICHAEL W A. 29Si solid-state NMR study of mesoporous M41S materials[J]. Chemistry of Materials,1995,7(10):1829-1832. doi: 10.1021/cm00058a012
|
[66] |
刘栎锟, 叶钢, 陈靖, 等. 冠醚修饰的SBA-15型有序介孔硅基材料及应用: 中国, CN106268653B[P]. 2019-04-05.
LIU Likun, YE Gang, CHEN Jing, et al. SBA-15 ordered mesoporous silicon based materials modified by crown ether and its application: China, CN106268653B[P]. 2019-04-05(in Chinese).
|
[67] |
OGBEMI O O, MARK A J, STEPHEN D N. Gelcasting: From laboratory development toward industrial production[J]. Journal of the European Ceramic Society,1997,17(2):407-413.
|
[68] |
任强, 武秀兰. 微米级多孔陶瓷的研究[J]. 中国陶瓷工业, 2003, 10(2):21-23.
REN Qiang, WU Xiulan. Development on micron porous ceramics[J]. China Ceramic Industry,2003,10(2):21-23(in Chinese).
|
[69] |
YANAGISAWA K, IOKU K, YAMASAKI N. Formation of anatase porous ceramics by hydrothermal hot-pressing of amorphous titania spheres[J]. Journal of the American Ceramic Society,1997,80(5):1303-1306.
|
[70] |
DING S Q, ZHU S, ZENG Y P, et al. Fabrication of mullite-bonded porous silicon carbide ceramics by in situ reaction bonding[J]. Journal of the European Ceramic Society,2007,27(4):2095-2102. doi: 10.1016/j.jeurceramsoc.2006.06.003
|
[71] |
KISHIMOTO A, OBATA M, ASAOKA H, et al. Fabrication of alumina-based ceramic foams utilizing superplasticity[J]. Journal of the European Ceramic Society,2007,27(1):41-45. doi: 10.1016/j.jeurceramsoc.2006.03.002
|
[72] |
JAYASEELAN D D, KONDO N, BRITO M E, et al. High-strength porous alumina ceramics by the pulse electric current sintering technique[J]. Journal of the American Ceramic Society,2002,85(1):267-269.
|
[73] |
MASAYA K, JUNYA Y, YASUSHI S, et al. Preparation and electrochemical characteristics of N-enriched carbon foam[J]. Carbon,2007,45(5):1105-1107. doi: 10.1016/j.carbon.2007.02.023
|
[74] |
ZHANG G J, YANG J F, OHJI T. Fabrication of porous ceramics with unidirectionally aligned continuous pores[J]. Journal of the American Ceramic Society,2001,84(6):1395-1397.
|
[75] |
ZHANG W, LI M, WANG C, et al. Micropatterning of porous structures from Co/continuous polymer blends[J]. Advances in Polymer Technology,2013,32(1):166-179.
|
[76] |
TANG F Q, FUDOUZI H, UCHIKOSHI T, et al. Preparation of porous materials with controlled pore size and poro-sity[J]. Journal of the European Ceramic Society,2004,24(2):341-344. doi: 10.1016/S0955-2219(03)00223-1
|
[77] |
JIANG F Y, WANG J B, HE X H, et al. Morphgenetic Al2O3 porous ceramic with fabric-structure by processed bio-template from ramie fibres[J]. Materials Letters,2017,194(1):242-245.
|
[78] |
XIONG D B, CAO M, GUO Q, et al. Graphene-and-copper artificial nacre fabricated by a preform impregnation process: Bioinspired strategy for strengthening-toughening of metal matrix composite[J]. ACS Nano,2015,9(7):6934-6943. doi: 10.1021/acsnano.5b01067
|
[79] |
LU Y, YANG J F, LU W Z, et al. The mechanical properties of co-continuous Si3N4/Al composites manufactured by squeeze casting[J]. Materials Science and Engineering: A,2010,527(23):6289-6299. doi: 10.1016/j.msea.2010.06.047
|
[80] |
DELUCA M A, MCCORMACK J F. Metallization of ceramics: US, US 4604299[P]. 1986-08-05.
|
[81] |
RODRGUEZ-LORENZO L M, FERREIRA J M F. Development of porous ceramic bodies for applications in tissue engineering and drug delivery systems[J]. Materials Research Bulletin,2004,39(1):83-91. doi: 10.1016/j.materresbull.2003.09.014
|
[82] |
WOO B H, SONE M, SHIBATA A, et al. Effects of SC-CO2 catalyzation in metallization on polymer by electroless plating[J]. Surface and Coatings Technology,2009,203(14):1971-1978. doi: 10.1016/j.surfcoat.2009.01.031
|
[83] |
LOUIS S. Method of coating metal: US, US 3185596[P]. 1965-05-25.
|
[84] |
AKHMETZYANOV M, ALBAUT G. Study of large plastic strains and fracture in metal elements by photoelastic coating method[J]. International Journal of Fracture,2004,128(1-4):223-231.
|
[85] |
GHOSH S, SENGUPTA A, PAL K S, et al. Characterization of metallized alumina ceramics[J]. Metallurgical & Materials Transactions A: Physical Metallurgy & Materials Science,2012,43(3):912-920.
|
[86] |
CHENG Y S, YEUNG K L. Effects of electroless plating chemistry on the synthesis of palladium membranes[J]. Journal of Membrane Science,2001,182(1-2):195-203. doi: 10.1016/S0376-7388(00)00563-9
|
[87] |
SHAFEEV G A, BELLARD L, THEMLIN J M, et al. Uncongruent laser ablation and electroless metallization of SiC[J]. Applied Physics Letters,1996,68(6):773. doi: 10.1063/1.116738
|
[88] |
WANG Y, XU Y H, CAO Z Y, et al. A facile process to manufacture high performance copper layer on ceramic material via biomimetic modification and electroless plating[J]. Composites,2019,157(15):123-130.
|
[89] |
JACSON T R, LIU H, PATRIKALAKIS N M. Modeling and designing functionally graded material components for fabrication with local composition control[J]. Materials & Design,1999,20(2-3):63-75.
|
[90] |
NIINO M, HIRAI T, WATANABE R. Functionally gradient materials[J]. Journal of Japanese Society of Composite Material,1987,13(6):257. doi: 10.6089/jscm.13.257
|
[91] |
DELFOSSE D. Fundamentals of functionally graded materials[J]. Materials Today,1998,1(4):18. doi: 10.1016/S1369-7021(98)80023-0
|
[92] |
JIN Z H, PAULINO G H. Transient thermal stress analysis of an edge crack in a functionally graded material[J]. International Journal of Fracture,2001,107(1):73-98. doi: 10.1023/A:1026583903046
|
[93] |
艾桃桃. 梯度多孔陶瓷的制备技术[J]. 中国陶瓷, 2011, 47(3):59-61, 76.
AI T T. Preparation techique of gradient porous ceramics[J]. China Ceramic,2011,47(3):59-61, 76(in Chinese).
|
[94] |
ZHOU W B, ZHANG R B, AI S G, et al. Load distribution in threads of porous metal-ceramic functionally graded composite joints subjected to thermomechanical loading[J]. Composite Structures,2015,134:680-688. doi: 10.1016/j.compstruct.2015.08.113
|
[95] |
ZHANG F, QI C X, WANG S, et al. A study on preparation of cordierite gradient pores porous ceramics from rectorite[J]. Solid State Sciences,2011,13(5):929-933. doi: 10.1016/j.solidstatesciences.2011.02.015
|
[96] |
KEN D, CAROLINE R C. Processing of functionally gradient ceramic membrane substrates for enhanced porosity[J]. Journal of the American Ceramic Society,1999,82(8):2073-2079.
|
[97] |
HALLORAN J. Materials science: Making better ceramic composites with ice[J]. Science,2006,311(5760):479-480. doi: 10.1126/science.1123220
|
[98] |
LUCHINI B, HUBÁLKOVÁ J, WETZIG T, et al. Carbon-bonded alumina foam filters produced by centrifugation: A route towards improved homogeneity[J]. Ceramics International,2018,44(12):13832-13840. doi: 10.1016/j.ceramint.2018.04.228
|
[99] |
AHMED A, SMITH J, ZHANG H. Gradient porous materials by emulsion centrifugation[J]. Chemical Communications,2011,47:11754-11760. doi: 10.1039/c1cc15212b
|
[100] |
TRUNEC M, MISAK J. Consolidation of nanoparticle suspensions by centrifugation in non-porous moulds[J]. Ceramics International,2014,40(6):7775-7782. doi: 10.1016/j.ceramint.2013.12.120
|
[101] |
GOMBOTZ W R, HEALY M S, BROWN L R. Very low temperature casting of controlled release microspheres: US, US5019400[P]. 1991-05-28.
|
[102] |
TANG Y F, WU C, ZHAO K. Fabrication of lamellar porous alumina with graded structures by combining centrifugal and directional freeze casting[J]. Ceramics International,2017,44(5):5794-5798.
|
[103] |
DEVILLE S, SAIZ E, TOMSIA P A. Freeze casting of hydroxyapatite scaffolds for bone tissue engineering[J]. Biomaterials,2006,27(32):5480-5489. doi: 10.1016/j.biomaterials.2006.06.028
|
[104] |
KONOPKA K, OLSZÁWKA-MYALSKA A, SZAFRAN M. Ceramic-metal composites with an interpenetrating network[J]. Materials Chemistry and Physics,2003,81(2-3):329-332. doi: 10.1016/S0254-0584(02)00595-3
|
[105] |
ZHENG J, HU Y Y. New insights into compositional dependence of Li-ion transport in polymer-ceramic compo-site electrolytes[J]. ACS Applied Materials & Interfaces,2018,10(4):4113-4120.
|
[106] |
AL-KETAN O, ASSAD A, AL-RUB R K A. Mechanical properties of periodic interpenetrating phase composites with novel architected microstructures[J]. Composite Structures,2017,176:9-19. doi: 10.1016/j.compstruct.2017.05.026
|
[107] |
ROY S, STOLL O, KAY ANDRÉ W, et al. Analysis of the elastic properties of an interpenetrating AlSi12-Al2O3 composite using ultrasound phase spectroscopy[J]. Composites Science and Technology,2011,71(7):962-968. doi: 10.1016/j.compscitech.2011.02.014
|
[108] |
JANINA D A. Tribological properties of AlSi12-Al2O3 interpenetrating composite layers in comparison with unreinforced matrix alloy[J]. Materials,2017,10(9):1045. doi: 10.3390/ma10091045
|
[109] |
SIDDHARTHA R, JENS G, VLADIMIR K, et al. Load partitioning study in a 3D interpenetrating AlSi12/Al2O3 metal/ceramic composite[J]. Materials Science Forum,2013,772(2):103-107.
|
[110] |
KRISHNA S A M, SHRIDHA T N, KRISHNAMURTHY L. Experimental investigations on thermal analysis and thermal characterization of Al 6061-Sic-Gr hybrid metal matrix composites[J]. International Journal of Material Science Innovations,2015,5(2):54-66. doi: 10.12783/ijmsci.2015.0502.04
|
[111] |
WANG D, ZHENG Z, LV J, et al. Enhanced thermal conductive 3D-SiC/Al-Si-Mg interpenetrating composites fabricated by pressureless infiltration[J]. Ceramics International,2016,43(2):1755-1761.
|
[112] |
YAN H, YE H Y, CHEN W. Dry friction and wear performance of cocontinuous Al-23Si/SiC composites[J]. Materials Research Innovations,2015,19(9):131-135.
|
[113] |
NAPOLE G E D, GOLDENSTEIN H, CARMO G M D, et al. Aluminium matrix composites reinforced with co-continuous in-terlaced phases aluminium-alumina needles[J]. Materials Research, 2002, 5(3): 337-342.
|
[114] |
YU L, JIANG YL, LU SK, et al. Numerical simulations of compression properties of SiC/Fe-20Cr Co-continuous composites[C]//1st International Conference on 3D Materials Science. New Jersey: Wiley, 2016: 85-90.
|
[115] |
SOY U, DEMIR A, CALISKAN F. Effect of bentonite addition on fabrication of reticulated porous SiC ceramics for liquid metal infiltration[J]. Ceramics International, 2011, 37(1): 15-19.
|
[116] |
KIM J S, KWON Y S, LOMOVSKY O I, et al. A synthetic route for metal-ceramic interpenetrating phase compo-sites[J]. Materials Letters,2006,60(29-30):3723-3726. doi: 10.1016/j.matlet.2006.03.096
|
[117] |
SAEID K, HAMID B, ROSHANAK L. The effect of calcination temperature on synthesis of B4C-nano Tib2 compo-site by co-precipitation method[J]. Oriental Journal of Chemistry,2016,32(4):2243-2249. doi: 10.13005/ojc/320457
|
[118] |
TOMICZEK B, KUJAWA M, MATULA G, et al. Aluminium AlSi12 alloy matrix composites reinforced by mullite porous preforms[J]. Materialwissenschaft Und Werkstofftechnik,2015,46(4-5):368-376. doi: 10.1002/mawe.201500411
|
[119] |
TIHAY F, POURROY G, RICHARD-PLOUET M, et al. Effect of fischer-tropsch synthesis on the microstructure of Fe-Co-based metal/spinel composite materials[J]. Applied Catalysis A General,2001,206(1):29-42. doi: 10.1016/S0926-860X(00)00595-0
|
[120] |
YANG J Y, CHUNG D D L. Casting particulate and fibrous metal-matrix composites by vacuum infiltration of a liquid metal under an inert gas pressure[J]. Journal of Materials Science,1989,24:3605-3612. doi: 10.1007/BF02385746
|
[121] |
BINNER J, CHANG H, HIGGINSON R. Processing of ceramic-metal interpenetrating composites[J]. Journal of the European Ceramic Society,2009,29(5):837-842. doi: 10.1016/j.jeurceramsoc.2008.07.034
|
[122] |
LEE K B, KIM Y S, KWON H. Fabrication of Al-3 Wtpct Mg matrix composites reinforced with Al2O3 and SiC particulates by the pressureless infiltration technique[J]. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,1998,29(12):3087-3095. doi: 10.1007/s11661-998-0216-9
|
[123] |
ISAACS J A, TARICCO F, MICHAUD V J, et al. Chemical stability of zirconia-stabilized alumina fibers during pressure infiltration by aluminum[J]. Metallurgical Transactions A,1991,22(12):2855-2862. doi: 10.1007/BF02650246
|
[124] |
ZHU J, WANG F, WANG Y, et al. Interfacial structure and stability of a co-continuous SiC/Al composite prepared by vacuum-pressure infiltration[J]. Ceramics International,2017,43(8):6563-6570. doi: 10.1016/j.ceramint.2017.02.085
|
[125] |
JHAVER R, TIPPUR H. Processing, compression response and finite element modeling of syntactic foam based interpenetrating phase composite (IPC)[J]. Materials Science & Engineering A,2009,499(1-2):507-517.
|
[126] |
YU L, JIANG Y L, RU H Q, et al. Microstructures of co-continuous SiC/Fe2Cr13 composite fabricated by vacuum-pressure casting and infiltration processes[J]. Advanced Materials Research,2011,239-242:1661-1664. doi: 10.4028/www.scientific.net/AMR.239-242.1661
|
[127] |
XING H W, CAO X M, Hu W P, et al. Interfacial reactions in 3D-SiC network reinforced Cu-matrix composites prepared by squeeze casting[J]. Materials Letters,2005,59(12):1563-1566. doi: 10.1016/j.matlet.2005.01.023
|
[128] |
REN W S, RAN G H, ZI W Y, et al. The fabrication method and research progress of the reticulated ceramic reinforcement in metal matrix composites[J]. Materials For Mechanical Engineering,2005,29(12):1-59.
|
[129] |
QIN S S. Metal-matrix composites for marine applications: Development status and our countermeasures[J]. Materials Review,2003,17(10):68-70.
|
[130] |
YAN H, YE H Y, CHEN W. Dry friction and wear performance of co-continuous Al-23Si/SiC composites[J]. Material Research Innovations,2015,19(9):131-135.
|
[131] |
DIMIDUK D M, DUTTON R. Technical report OMB No. 0704-0188[R]. Washington: Materials and Manufacturing Directorate Air Force Research Laboratory, 2004.
|
[132] |
PENG H X, FAN Z, EVANS J R G. Bi-continuous metal matrix composites[J]. Materials Science & Engineering A,2001,303(1-2):37-45.
|
[133] |
SEITZ H, RIEDER W, IRSEN S, et al. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering[J]. Journal of Biomedical Materials Research Part B: Applied Biomaterials,2010,74B(2):782-788.
|
[134] |
LEE J Y, TAN W S, AN J, et al. The potential to enhance membrane module design with 3D printing technology[J]. Journal of Membrane ence,2016,499:480-490.
|
[135] |
MOTAMAN S A H, KIES F, KHNEN P, et al. Optimal design for metal additive manufacturing: An integrated computational materials engineering (ICME) approach[J]. JOM,2020,72(3):1092-1104. doi: 10.1007/s11837-020-04028-4
|
[136] |
POST G, KEESTRA M, RUTTING L. An introduction to interdisciplinary research[M]. Amsterdam: Amsterdam University Press, 2016: 20.
|
[137] |
SWITHENBANK J. Some unresolved problems in the fluid mechanics of combustion[J]. Journal of Fluids Engineering,1975,97(3):287. doi: 10.1115/1.3447305
|
[138] |
SURUJHLAL D, SKEWS B W. Three-dimensional shock wave reflection transition in steady flow[J]. Journal of Fluid Mechanics,2019,858:565-587. doi: 10.1017/jfm.2018.747
|
[139] |
LUDMILA C. Performance modeling in mapreduce environments: Challenges and opportunities[C]//Proceedings of the 2nd ACM/SPEC International Conference on Performance Engineering. New York: Association for Computing Machinery, 2011: 5-6.
|
[140] |
MOON S K, TAN Y E, HWAN J H, et al. Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures[J]. International Journal of Precision Engineering & Manufacturing Green Technology,2014,1(3):223-228.
|