Citation: | HAN Jianqiu, XU Xiaoyan, XIAO Yongbo, et al. Construction and enhanced thermal properties of hollow glass beads/ aromatic thermosetting polyester composite foam[J]. Acta Materiae Compositae Sinica, 2021, 38(1): 93-101. doi: 10.13801/j.cnki.fhclxb.20200720.001 |
[1] |
李彬. 碳纳米聚氨酯泡沫吸能特性研究及其应用[D]. 长春: 吉林大学, 2017.
LI Bin. Study on energy absorption characteristics of carbon nano polyurethane foam and application in autobody[D]. Changchun: Jiling University, 2017(in Chinese).
|
[2] |
王富鑫. 酚醛泡沫塑料应用及制备[J]. 热固性树脂, 2002, 17(4):36-38. doi: 10.3969/j.issn.1002-7432.2002.04.011
WANG Fuxin. Manufacture and application of foamed phenolic resin[J]. Thermosetting Resin,2002,17(4):36-38(in Chinese). doi: 10.3969/j.issn.1002-7432.2002.04.011
|
[3] |
LIU Z, ZHAN J, FARD M, et al. Acoustic properties of a porous polycarbonate material produced by additive manufacturing[J]. Materials Letters,2016,181:296-299. doi: 10.1016/j.matlet.2016.06.045
|
[4] |
马明明. 聚酰亚胺泡沫塑料的制备与性能表征[D]. 青岛: 青岛科技大学, 2011.
MA Mingming. The synthesis and properties characterization of polyimide foams[D]. Qingdao: Qingdao University of Science & Technology, 2011 (in Chinese).
|
[5] |
TANG H Y, CHEN L. Preparation and characterization of polymethacrylimide foam[J]. Advanced Materials Research,2010,160-162:1309-1313. doi: 10.4028/www.scientific.net/AMR.160-162.1309
|
[6] |
FRICH D, GORANOV K, SCHNEGGENBURGER L, et al. Novel high-temperature aromatic copolyester thermosets: Synthesis, characterization, and physical properties[J]. Macromolecules,1996,29(24):7734-7739.
|
[7] |
HUANG Y Q, MCCORMICK J J, ECONOMY J. Adhesion of an aromatic thermosetting copolyester with copper foils[J]. Polymers for Advanced Technologies,2005,16(1):1-5.
|
[8] |
WANG W Q, MEYER J, ZENG Q X, et al. Adhesion characteristics of aromatic thermosetting copolyester and glass fiber laminates with copper foils for improved circuit boards[J]. Polymers for Advanced Technologies,2016,27(12):1577-1585.
|
[9] |
ZHANG J, DEMAS N G, POLYCARPOU A A, et al. A new family of low wear, low coefficient of friction polymer blend based on polytetrafluoroethylene and an aromatic thermosetting polyester[J]. Polymers for Advanced Technologies,2008,19(8):1105-1112. doi: 10.1002/pat.1086
|
[10] |
ZHANG J, POLYCARPOU A A, ECONOMY J. An improved tribological polymer-coating system for metal surfaces[J]. Tribology Letters,2010,38(3):355-365. doi: 10.1007/s11249-010-9615-3
|
[11] |
胡培. 飞机夹层结构的设计和泡沫芯材的选择[J]. 航空制造技术, 2010(17):94-96. doi: 10.3969/j.issn.1671-833X.2010.17.022
HU Pei. Design of sandwich structure and selection of foam core material for aircraft[J]. Aeronautical Manufacturing Technology,2010(17):94-96(in Chinese). doi: 10.3969/j.issn.1671-833X.2010.17.022
|
[12] |
陈一民, 何斌. PMI高性能泡沫夹层材料的应用及国内研制现状[C]//第十六届全国复合材料学术年会. 长沙: 中国航空学会, 2010: 360-363.
CHEN Yimin, HE Bin. The research and application of PMI foam in china[C]//16th National Conference on Composite Materials. Changsha: Chinese Society of Aeronautics and Astronautics, 2010: 360-363 (in Chinese).
|
[13] |
HARTE A M, MCNAMARA J F, RODDY I D. A multilevel approach to the optimization of a composite light rail vehicle bodyshell[J]. Composite Structures,2004,63(3-4):447-453.
|
[14] |
CHU H. Application of polyimide foam materials in aerospace vehicles[J]. Aerospace Materials & Technology,2006,36(3):1-3.
|
[15] |
吕方, 朱光明, 胡巧青, 等. 玻璃微珠填充改性聚合物研究进展[J]. 玻璃钢/复合材料, 2008(3):53-56.
LV Fang, ZHU Guangming, HU Qiaoqing, et al. Advances of glass bead filled polymer composites[J]. Fiber Reinforced Plastics/Composites,2008(3):53-56(in Chinese).
|
[16] |
窦艳鹏, 孙淑芹, 吴湘锋. 高性能空心玻璃微珠的制备及其表面改性进展[J]. 中国粉体工程, 2012(1):7-13.
DOU Yanpeng, SUN Shuqin, WU Xiangfeng. Progress in preparation and surface treatment of hollow glass beads with high performance[J]. China Powder Industry,2012(1):7-13(in Chinese).
|
[17] |
杨庆泉. 环氧树脂/氰酸酯树脂固化反应机理及环氧树脂/玻璃布/玻璃微珠体系力学性能研究[D]. 北京: 北京化工大学, 2003.
YANG Qingquan. A study on mechanism of the co-reaction of epoxy and cyanate and the mechanical properties of epoxy/glass cloth/hollow glass-bead blend[D]. Beijing: Beijing University of Chemical Technology, 2003(in Chinese).
|
[18] |
周秋明, 王建华, 田春蓉, 等. 空心玻璃微珠复合聚氨酯泡沫的模塑成型收缩率[J]. 塑料工业, 2002, 30(5):23-24. doi: 10.3321/j.issn:1005-5770.2002.05.009
ZHOU Qiuming, WANG Jianhua, TIAN Chunrong, et al. Analysis of mechanical properties of UHMWPE composite filled with different filler[J]. China Plastics Industry,2002,30(5):23-24(in Chinese). doi: 10.3321/j.issn:1005-5770.2002.05.009
|
[19] |
孙佳慧. 球壳结构轻质树脂基复合材料的制备及性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2016.
SUN Jiahui. Study on the preparation and properties of spherical shell structure lightweight resin-based composite materials[D]. Harbin: Harbin Engineering University, 2016(in Chinese).
|
[20] |
中国国家标准化管理委员会. 硬质泡沫塑料压缩性能的测定: GB/T 8813—2008[S]. 北京: 中国标准出版社, 2008.
Standardization Administration of of the People’s Republic of China. Rigid cellular plastics: Determination of compression properties: GB/T 8813—2008[S]. Beijing: China Standards Press, 2008(in Chinese).
|
[21] |
中国国家标准化管理委员会. 塑料负荷变形温度的测定 第2部分: 塑料、硬橡胶和长纤维增强复合材料: GB/T 1634.2—2004[S]. 北京: 中国标准出版社, 2004.
Standardization Administration of of the People’s Republic of China. Plastics: Determination of temperature of deflection under load Part 2: Plastics, ebonite and long-fiber-reinforced composites: GB/T 1634.2—2004[S]. Beijing: China Standards Press, 2004(in Chinese).
|
[22] |
中国国家标准化管理委员会. 塑料用氧指数法测定燃烧行为 第2部分: 室温实验: GB/T 2406.2—2009[S]. 北京: 中国标准出版社, 2010.
Standardization Administration of of the People’s Republic of China. Plastics: Determination of burning behavior by oxygen index Part 2: Ambient-temperature test: GB/T 2406.2—2009[S]. Beijing: China Standards Press, 2010(in Chinese).
|
[23] |
中国国家标准化管理委员会. 硬质泡沫塑料燃烧性能试验方法: 垂直燃烧法: GB/T 8333—2008[S]. 北京: 中国标准出版社, 2008.
Standardization Administration of of the People’s Republic of China. Test method for flammability of rigid cellular plastic: Vertical burning method: GB/T 8333—2008[S]. Beijing: China Standards Press, 2008(in Chinese).
|
[24] |
GUO M X. Design of aromatic thermosetting polyester composites for thermally stable devices[D]. Illinois: University of Illinois at Urbana-Champaign, 2014.
|
[25] |
马立, 刘芃, 胡培. PMI泡沫材料在航天器结构中应用的可行性研究[J]. 航天器环境工程, 2010, 27(2):164-168. doi: 10.3969/j.issn.1673-1379.2010.02.008
MA Li, LIU Peng, HU Pei. Feasibility study of application of PMI foam in spacecraft structure[J]. Spacecraft Environment Engineering,2010,27(2):164-168(in Chinese). doi: 10.3969/j.issn.1673-1379.2010.02.008
|
[26] |
张翠, 张广成, 陈挺, 等. AN/MAA/AM三元共聚物的合成及性能研究[J]. 热固性树脂, 2006, 21(4):9-13. doi: 10.3969/j.issn.1002-7432.2006.04.003
ZHANG Cui, ZHANG Guangcheng, CHEN Ting, et al. Synthesis and properties of AN/MAA/AM terpolymer[J]. Thermosetting Resin,2006,21(4):9-13(in Chinese). doi: 10.3969/j.issn.1002-7432.2006.04.003
|
[27] |
廖前程. 硬质交联聚氯乙烯发泡板材研究制备[D]. 北京: 北京化工大学, 2010.
LIAO Qiancheng. The preparation of rigid cross-linked foamed polyvinyl chloride sheet[D]. Beijing: Beijing University of Chemical Technology, 2010(in Chinese).
|